A free, open-source emulator for 19 embedded boards: Arduino, ESP32, Raspberry Pi, RISC-V , running real compiled code in your browser.
The best part: it's fully local.
No cloud dependency. No student accounts. No data leaving your network. Self-hostable with a single Docker container.
Universities and bootcamps can deploy it on their own servers and give every student access to a complete embedded development environment, for free.
I've been working on this for over a year, and just shipped v2.0 with ESP32 emulation (via QEMU), a custom RISC-V core, and Raspberry Pi 3 support that runs real Python
The main advantage is accessibility and ease of use: with the browser, no setup is required on the user’s side, no toolchains need to be installed, and there’s no need to be familiar with SSH or terminal workflows
It also provides a more visual and interactive environment (editor, peripherals, simulation controls), which is especially useful for teaching and for beginners.
The Docker image is there so you can easily install it on your own machine if you want to run it locally or work on development
Thanks! The visual editor is actually a big part of the project
I used a little AI to create the graphical interface since I focused heavily on emulation, testing, and refining and optimizing the circuit editor. But now I have plans to improve the UI and make it faster and more intuitive
Still a lot to improve there, but glad it’s useful already
Is it easy to feed an elf or bin and run that (esp32c3)? I see compilation available, but I'm playing with asm and have my toolchain figured out already and would just like to emulate the firmware.
Another +1 for this one as this is what turns this tool from a toy environment with basic sketches into something that's actually useful for larger projects with a full toolchain, libraries, and so forth.
A lot of simulators stop at simple sketches, but the goal with Velxio is to support more realistic workflows , multiple boards interacting, real toolchains, and more complex setups
Still early, but definitely moving in that direction
Hey HN, I posted Velxio here a while back and got great feedback. Since then I've shipped a major update
What's new in v2:
- 19 boards across 5 CPU architectures (AVR8, Xtensa, RISC-V, ARM Cortex-M0+, ARM Cortex-A53)
- ESP32 emulation via QEMU (lcgamboa fork) — real flash images, ROM function emulation, GPIO/ADC/timers
- ESP32-C3 and CH32V003 run on a custom RISC-V core written in TypeScript, entirely in the browser
- Raspberry Pi 3B via QEMU raspi3b — boots real Pi OS, runs Python
- Realistic sensor simulation: DHT22 (40-bit protocol timing), HC-SR04 (trigger/echo), WS2812B NeoPixel (GRB decoding)
- 48+ electronic components from wokwi-elements
Architecture:
- AVR, RP2040, and RISC-V emulation runs client-side (avr8js, rp2040js, custom TS core)
- ESP32 Xtensa and Pi 3 run on backend QEMU
- Compilation via real arduino-cli
- React + Vite frontend, FastAPI backend
- Self-hostable via Docker, no account needed
When I try to visit velxio.dev, a CrowdSec page shows up and says I am not allowed to view it. I am a pretty normal android user on firefox mobile, so that is surprising.
I look forward to trying this out though, great project!
Really awesome project, it runs well on my old android phone, the fact that I can use a tool like this on my phone is pretty wild, you have done well with the UI in that regard. The oscilloscope is a really nice feature too.
Oh, thanks for reporting this.that definitely shouldn’t happen.
It’s likely an overly aggressive CrowdSec rule blocking some legitimate traffic. I’ll look into it and adjust the configuration
Thanks! That’s a great suggestion, supporting WS2812B strips with arbitrary length is definitely something I’d like to add. I also have in mind adding many more LED based components. I’ll take a look at improving the canvas scrolling too
That looks awesome, thank you for your hard work! I would love tinker with it, but I'm not sure how to abstract things connected to those supported u_controller boards? Example, 7x16 Pico unicorn hat is driven by RP2040 PIO.
I often write a bunch of Esphome ‘code’ , which I then use with various esp32 based devices (mostly from M5stack) via esphome/HomeAssistant.
Can this project help me in any way during dev stage before uploading the code to device just to see it doesn’t work ? Eg could I use this to somehow compile&run those esphome yamls via this emulator?
That’s a really interesting use case. I’m currently evaluating integrating the ESPHome compiler into the project, so it could potentially compile and run ESPHome YAMLs during the development stage
It’s still exploratory, but it could definitely go in that direction
That would be awesome! ESPHome is the easiest way to integrate custom devices into your HomeAssistant with online updates, logs, and other functionality. Nothing else comes close.
One suggestion: The main splash screen image is nearly 8MB big. It takes a noticeable time to download on my connection. I'm not sure what bandwidth costs these days, but seems like that could be something to optimize.
Velxio is definitely inspired by Wokwi, and I really like what they’ve built. Parts of Velxio also reuse open-source components , for example, the wokwi elements are used for the visual SVG rendering of boards and peripherals, but they don’t include any emulation logic.
I also integrated a couple of existing open-source emulators, like the Raspberry Pi Pico and Arduino ones. And I even reached out to the creator of Wokwi to share the project.
In terms of differences, one of the biggest ones is that Velxio supports multiple heterogeneous boards in the same circuit: for example, two Arduinos connected over SPI or serial, ESP32 with Arduino, Raspberry Pi 3 with a Pico, etc.
Another major difference is the focus on full emulation, including ESP32 (via QEMU) and a Raspberry Pi 3 running Linux (still in beta).
There are also quite a few other differences, but those are probably the most notable ones
Nice work! One minor point for me: it wasn’t immediately clear that you need to press Compile before Play gets enabled (e.g. Arduino IDE let's you upload right away and compiles if needed)
The container instructions has `-d` in it, but note that after booting the container it downloads another, I don't know, 300+mb more (its still downloading as I write), so if you can't connect that's why.
Might be better to not include `-d` in the instructions?
Exactly,that’s the idea. Not having to flash the chip a thousand times just to see if everything works. The goal is to let you test the setup as fast as possible, ideally without installing anything locally
The Raspberry Pi emulation already runs Python, and I’d like to extend that into proper MicroPython / CircuitPython support for microcontrollers as well
It’s a bit tricky depending on the board/emulator, but definitely a priority!
Nice Project. One of the benefits of such small boards is the ability to provide a "Hands on" experience. Use your hands to wire, press buttons and turn knobs. Emulating all this is a big thing but it takes away the learning in my eyes. It's like flying drones. It looks cool but gets boring after 10 minutes.
Velxio 2.0 is live.
A free, open-source emulator for 19 embedded boards: Arduino, ESP32, Raspberry Pi, RISC-V , running real compiled code in your browser.
The best part: it's fully local.
No cloud dependency. No student accounts. No data leaving your network. Self-hostable with a single Docker container.
Universities and bootcamps can deploy it on their own servers and give every student access to a complete embedded development environment, for free.
I've been working on this for over a year, and just shipped v2.0 with ESP32 emulation (via QEMU), a custom RISC-V core, and Raspberry Pi 3 support that runs real Python
Emulating the CPU is nice, but the trouble has always been emulating the peripherals
Does your editor do this? I tried the example but didn't see e.g. LEDs blinking
just curious - if it runs from a docker container, what is the advantage of running the browser as opposed to just ssh'ing in ?
The main advantage is accessibility and ease of use: with the browser, no setup is required on the user’s side, no toolchains need to be installed, and there’s no need to be familiar with SSH or terminal workflows
It also provides a more visual and interactive environment (editor, peripherals, simulation controls), which is especially useful for teaching and for beginners.
The Docker image is there so you can easily install it on your own machine if you want to run it locally or work on development
The visual component editor does look pretty nice :-) I guess I always just associated sbc's with a more 'hands on' style...
Anyway, seems like a pretty cool project - congrats!
Thanks! The visual editor is actually a big part of the project
I used a little AI to create the graphical interface since I focused heavily on emulation, testing, and refining and optimizing the circuit editor. But now I have plans to improve the UI and make it faster and more intuitive
Still a lot to improve there, but glad it’s useful already
Is it easy to feed an elf or bin and run that (esp32c3)? I see compilation available, but I'm playing with asm and have my toolchain figured out already and would just like to emulate the firmware.
Another +1 for this one as this is what turns this tool from a toy environment with basic sketches into something that's actually useful for larger projects with a full toolchain, libraries, and so forth.
That’s exactly the direction I’m aiming for
A lot of simulators stop at simple sketches, but the goal with Velxio is to support more realistic workflows , multiple boards interacting, real toolchains, and more complex setups
Still early, but definitely moving in that direction
Good job
Hey HN, I posted Velxio here a while back and got great feedback. Since then I've shipped a major update
What's new in v2:
- 19 boards across 5 CPU architectures (AVR8, Xtensa, RISC-V, ARM Cortex-M0+, ARM Cortex-A53) - ESP32 emulation via QEMU (lcgamboa fork) — real flash images, ROM function emulation, GPIO/ADC/timers - ESP32-C3 and CH32V003 run on a custom RISC-V core written in TypeScript, entirely in the browser - Raspberry Pi 3B via QEMU raspi3b — boots real Pi OS, runs Python - Realistic sensor simulation: DHT22 (40-bit protocol timing), HC-SR04 (trigger/echo), WS2812B NeoPixel (GRB decoding) - 48+ electronic components from wokwi-elements
Architecture:
- AVR, RP2040, and RISC-V emulation runs client-side (avr8js, rp2040js, custom TS core) - ESP32 Xtensa and Pi 3 run on backend QEMU - Compilation via real arduino-cli - React + Vite frontend, FastAPI backend - Self-hostable via Docker, no account needed
Source: https://github.com/davidmonterocrespo24/velxio (AGPLv3)
Happy to discuss the emulation architecture — particularly the trade-offs between in-browser vs. backend QEMU emulation
When I try to visit velxio.dev, a CrowdSec page shows up and says I am not allowed to view it. I am a pretty normal android user on firefox mobile, so that is surprising.
I look forward to trying this out though, great project!
Quick update: this should be fixed now. It was an overly aggressive CrowdSec rule blocking some legitimate traffic.
If anyone still has issues accessing velxio.dev, let me know
Nice one! I can access it now.
Really awesome project, it runs well on my old android phone, the fact that I can use a tool like this on my phone is pretty wild, you have done well with the UI in that regard. The oscilloscope is a really nice feature too.
Mobile support is something I’ve been paying a lot of attention to, so it's really good to know it runs well even on older devices.
And glad you liked the oscilloscope, that was a fun one to build.You can select the motherboard and ping you want to monitor.
Oh, thanks for reporting this.that definitely shouldn’t happen. It’s likely an overly aggressive CrowdSec rule blocking some legitimate traffic. I’ll look into it and adjust the configuration
Hi, adding WS2812B LED strips of arbitrary length would be awesome! Scrolling the canvas is sometimes problematic. Otherwise very interesting.
Thanks! That’s a great suggestion, supporting WS2812B strips with arbitrary length is definitely something I’d like to add. I also have in mind adding many more LED based components. I’ll take a look at improving the canvas scrolling too
That looks awesome, thank you for your hard work! I would love tinker with it, but I'm not sure how to abstract things connected to those supported u_controller boards? Example, 7x16 Pico unicorn hat is driven by RP2040 PIO.
I often write a bunch of Esphome ‘code’ , which I then use with various esp32 based devices (mostly from M5stack) via esphome/HomeAssistant.
Can this project help me in any way during dev stage before uploading the code to device just to see it doesn’t work ? Eg could I use this to somehow compile&run those esphome yamls via this emulator?
That’s a really interesting use case. I’m currently evaluating integrating the ESPHome compiler into the project, so it could potentially compile and run ESPHome YAMLs during the development stage
It’s still exploratory, but it could definitely go in that direction
That would be awesome! ESPHome is the easiest way to integrate custom devices into your HomeAssistant with online updates, logs, and other functionality. Nothing else comes close.
Quick update: traffic is still coming in waves, had to scale up compilation workers to keep up with demand
Things are more stable now, but still tuning performance under load
If anyone finds it useful, the source is here: https://github.com/davidmonterocrespo24/velxio
Always happy to get feedback or contributions.
First of all: Awesome work! Playing with it now.
One suggestion: The main splash screen image is nearly 8MB big. It takes a noticeable time to download on my connection. I'm not sure what bandwidth costs these days, but seems like that could be something to optimize.
Thanks a lot! Yes, that’s something I have pending, I’m planning to replace it with an SVG or an animated GIF to improve loading time
Can someone who has used both wokwi and this do a compare/contrast? The footer suggests that it's built on top of wokwi-elements
Velxio is definitely inspired by Wokwi, and I really like what they’ve built. Parts of Velxio also reuse open-source components , for example, the wokwi elements are used for the visual SVG rendering of boards and peripherals, but they don’t include any emulation logic.
I also integrated a couple of existing open-source emulators, like the Raspberry Pi Pico and Arduino ones. And I even reached out to the creator of Wokwi to share the project.
In terms of differences, one of the biggest ones is that Velxio supports multiple heterogeneous boards in the same circuit: for example, two Arduinos connected over SPI or serial, ESP32 with Arduino, Raspberry Pi 3 with a Pico, etc.
Another major difference is the focus on full emulation, including ESP32 (via QEMU) and a Raspberry Pi 3 running Linux (still in beta).
There are also quite a few other differences, but those are probably the most notable ones
Nice work! One minor point for me: it wasn’t immediately clear that you need to press Compile before Play gets enabled (e.g. Arduino IDE let's you upload right away and compiles if needed)
Good point.I’ll improve that. Thanks!
Pretty cool project! if you're checking it out, try one of the built-in examples and hit "Compile + Play". It runs immediately, no setup required
Thanks! Yeah, that’s probably the easiest way to get started, just load an example and hit “Compile + Play”.
I tried to make it as close to zero-setup as possible so people can just jump in and experiment
The container instructions has `-d` in it, but note that after booting the container it downloads another, I don't know, 300+mb more (its still downloading as I write), so if you can't connect that's why.
Might be better to not include `-d` in the instructions?
Good catch!!! thanks for pointing that out
The container pulls additional assets on first run (mainly emulation dependencies), which is why there's extra downloading even with -d.
You're right that it can be confusing. I'll update the instructions to make this clearer (and probably remove -d so users can see what's happening)
This is a great idea. It’s always been inconvenient requiring access to the physical board just to be able to test these sort of projects.
Exactly,that’s the idea. Not having to flash the chip a thousand times just to see if everything works. The goal is to let you test the setup as fast as possible, ideally without installing anything locally
This is fantastic. I am doing my first-ever consumer electronics product and this would save a lot of soldering time
That’s awesome — and exactly the kind of use case I had in mind
Being able to iterate without constantly flashing hardware can save a lot of time early on.
If you end up trying it in your workflow, I’d love to hear how it goes
Awesome. Is there any chance of getting MicroPython or CircuitPython support?
I’m currently working towards that.
The Raspberry Pi emulation already runs Python, and I’d like to extend that into proper MicroPython / CircuitPython support for microcontrollers as well
It’s a bit tricky depending on the board/emulator, but definitely a priority!
I like this Idea but I don't want to use this. I know what kind of prompt U using to create this one: "Create something like Wokwi and make it local"
Fair enough , though there’s quite a bit of low-level work behind it (emulation cores, QEMU integration, protocol timing, etc)
Definitely inspired by existing tools, but trying to push further into full multi-board emulation and local-first workflows
Abang
Great project! Now all there is left to do is a VS Code plugin. Also make it play nice with platform io.
Nice Project. One of the benefits of such small boards is the ability to provide a "Hands on" experience. Use your hands to wire, press buttons and turn knobs. Emulating all this is a big thing but it takes away the learning in my eyes. It's like flying drones. It looks cool but gets boring after 10 minutes.