I am on their "Coding Lite" plan, which I got a lot of use out of for a few months, but it has been seriously gimped now. Obvious quantization issues, going in circles, flipping from X to !X, injecting chinese characters. It is useless now for any serious coding work.
I'm on their pro plan and I respectfully disagree - it's genuinely excellent with GLM 5.1 so long as you remember to /compact once it hits around 100k tokens. At that point it's pretty much broken and entirely unusable, but if you keep context under about 100k it's genuinely on par with Opus for me, and in some ways it's arguably better.
The Dumb Zone for Opus has always started at 80-100k tokens. The 1M token window just made the dumb zone bigger. Probably fine if the work isn't complicated but really I never want an Opus session to go much beyond 100k.
I had thought this, but my experience initially was that performance degradation began getting noticeable not long after crossing the old 250k barrier.
So, it has been convenient to not have hard stops / allow for extra but I still try to /clear at an actual 25% of the 1M anyhow.
This is in contrast to my use of the 1M opus model this past fall over the API, which seemed to perform more steadily.
I’m genuinely surprised. I use copilot at work which is capped at 128K regardless of model and it’s a monorepo. Admittedly I know our code base really well so I can point towards different things quickly directly but I don’t think I ever needed compacting more than a handful in the past year. Let alone 1M tokens.
The cost per message increases with context while quality decreases so it’s still generally good to practice strategic context engineering. Even with cross-repo changes on enterprise systems, it’s uncommon to need more than 100k (unless I’m using playwright mcp for testing).
The context windows of these Chinese open-source subscriptions (GLM, Minimax, Kimi) is too small and I'm guessing it's because they are trying to keep them cheap to run. Fine for openclaw, not so much for coding.
I haven't screenshotted to alas, but it goes from being a perfectly reasonable chatty LLM, to suddenly spewing words and nonsense characters around this threshold, at least for me as a z.ai pro (mid tier) user.
For around a month the limit seemed to be a little over 60k! I was despondent!!
What's worse is that when it launched it was stable across the context window. My (wild) guess is that the model is stable but z.ai is doing something wonky with infrastructure, that they are trying to move from one context window to another or have some kv cache issues or some such, and it doesn't really work. If you fork or cancel in OpenCode there's a chance you see the issue much earlier, which feels like some other kind of hint about kv caching, maybe it not porting well between different shaped systems.
More maliciously minded, this artificial limit also gives them an artificial way to dial in system load. Just not delivering the context window the model has reduces the work of what they have to host?
But to the question: yes compaction is absolutely required. The ai can't even speak it's just a jumbled stream of words and punctuation once this hits. Is manual compaction required? One could find a way to build this into the harness, so no, it's a limitation of our tooling that our tooling doesn't work around the stated context window being (effectively) a lie.
I'd really like to see this improved! At least it's not 60-65k anymore; those were soul crushing weeks, where I felt like my treasured celebrated joyful z.ai plan was now near worthless.
The question is: will this reproduce on other hosts, now that glm-5.1 is released? I expect the issue is going to be z.ai specific, given what I've seen (200k works -> 60k -> 100k context windows working on glm-5.1).
I have gone back to having it create a todo.md file and break it into very small tasks. Then i just loop over each task with a clear context, and it works fine. a design.md or similar also helps, but most of the time i just have that all in a README.md file. I was also suspicious around the 100k almost to the token for it to start doing loops etc.
I am on the mid tier Coding plan to trying it out for the sake of curiosity.
During off peak hour a simple 3 line CSS change took over 50 minutes and it routinely times out mid-tool and leaves dangling XML and tool uses everywhere, overwriting files badly or patching duplicate lines into files
This is surprising to me. Maybe because I'm on Pro, and not Lite. I signed up last week and managed to get a ton of good work done with 5.1. I think I did run into the odd quantization quirk, but overall: $30 well spent
Every model seems that way, going back to even GPT 3 and 4, the company comes out with a very impressive model that then regresses over a few months as the company tries to rein in inference costs through quantization and other methods.
I'm on their lite plan as well and I've been using it for my OpenClaw. It had some issues but it also one-shotted a very impressive dashboard for my Twitter bookmarks.
For the price this is a pretty damn impressive model.
Is there any advantage to their fixed payment plans at all vs just using this model via 3rd party providers via openrouter, given how relatively cheap they tend to be on a per-token basis?
That's more expensive than other models, but not terrible, and will go down over time, and is far far cheaper than Opus or Sonnet or GPT.
I haven't had any bad luck with DeepInfra in particular with quantization or rate limiting. But I've only heard bad things about people who used z.ai directly.
It has been useless for long time when compared to Opus or even something like Kimi. The saving grace was that it was dirt cheap but that doesn't matter if it can't do what I want even after many repeated tries and trying to push it to a correct solution.
I'm crossing my fingers they release a flash version of this. GLM 4.7 Flash is the main model I use locally for agentic coding work, it's pretty incredible. Didn't find anything in the release about it - but hoping it's on the horizon.
Unsloth quantizations are available on release as well. [0] The IQ4_XS is a massive 361 GB with the 754B parameters. This is definitely a model your average local LLM enthusiast is not going to be able to run even with high end hardware.
SSD offload is always a possibility with good software support. Of course you might easily object that the model would not be "running" then, more like crawling. Still you'd be able to execute it locally and get it to respond after some time.
Meanwhile we're even seeing emerging 'engram' and 'inner-layer embedding parameters' techniques where the possibility of SSD offload is planned for in advance when developing the architecture.
To be honest I am a bit sad as, glm5.1 is producing mich better typescript than opus or codex imo, but no matter what it does sometimes go into shizo mode at some point over longer contexts. Not always tho I have had multiple session go over 200k and be fine.
When it works and its not slow it can impress. Like yesterday it solved something that kimi k2.5 could not. and kimi was best open source model for me. But it still slow sometimes. I have z.ai and kimi subscription when i run out of tokens for claude (max) and codex(plus).
i have a feeling its nearing opus 4.5 level if they could fix it getting crazy after like 100k tokens.
I honestly still hold onto habits from earlier days of Claude & Codex usage and tend to wipe / compact my context frequently. I don't trust the era of big giant contexts, frankly, even on the frontier models.
GLM-5.0 is the real deal as far as open source models go. In our internal benchmarks it consistently outperforms other open source models, and was on par with things like GPT-5.2. Note that we don't use it for coding - we use it for more fuzzy tasks.
I am working on a large scale dataset for producing agent traces for Python <> cython conversion with tooling, and it is second only to gemini pro 3.1 in acceptance rates (16% vs 26%).
Mid-sized models like gpt-oss minimax and qwen3.5 122b are around 6%, and gemma4 31b around 7% (but much slower).
I haven’t tried Opus or ChatGPT due to high costs on openrouter for this application.
Yep, haven't tried 5.1 but for my PHP coding, GLM-5 is 99% the same as Sonnet/Opus/GPT-5 levels. It is unbelievably strong for what it costs, not to mention you can run it locally.
Comments here seem to be talking like they've used this model for longer than a few hours -- is this true, or are y'all just sharing your initial thoughts?
My local tennis court's reservation website was broken and I couldn't cancel a reservation, and I asked GLM-5.1 if it can figure out the API. Five minutes later, I check and it had found a /cancel.php URL that accepted an ID but the ID wasn't exposed anywhere, so it found and was exploiting a blind SQL injection vulnerability to find my reservation ID.
Yeah it seems they did not align it to much, at least for now. Yesterday it helped me bypass the bot detection on a local marketplace. that i wanted to scrap some listing for my personal alerting system. Al the others failed but glm5.1 found a set of parameters and tweaks how to make my browser in container not be detected.
The focus on the speed of the agent generated code as a measure of model quality is unusual and interesting. I've been focusing on intentionally benchmaxxing agentic projects (e.g. "create benchmarks, get a baseline, then make the benchmarks 1.4x faster or better without cheating the benchmarks or causing any regression in output quality") and Opus 4.6 does it very well: in Rust, it can find enough low-level optimizations to make already-fast Rust code up to 6x faster while still passing all tests.
It's a fun way to quantify the real-world performance between models that's more practical and actionable.
In my opinion it would be way cooler if it actually created a real Linux desktop environment instead of only a replica.
Would it succeed? Probably not, but it would be way more interesting, even if it didn't work.
I find things like Claude's C compiler way more interesting where, even though CCC is objectively bad (code is messy, generates very bad unoptimized code, etc) it at least is something cool and shows that with some human guideance it could generate something even better.
I am already subscribed to their GLM Coding Pro monthly plan and working with GLM 5.1 coupled with Open Code is such a pleasure! I will cancel my Cursor subscription.
Thanks, I missed that. It's very interesting. They're quite close, but I found Qwen 3.6 plus was just marginally better than Kimi 2.5. But looking at the stats I'll definitely give GLM 5.1 a try now. [edit: even though looking at it, it's not cheap and has a much smaller context size.And I can't tell about tool use.]
It's an okay model. My biggest issue using GLM 5.1 in OpenCode is that it loses coherency over longer contexts. When you crest 128k tokens, there's a high chance that the model will start spouting gibberish until you compact the history.
For short-term bugfixing and tweaks though, it does about what I'd expect from Sonnet for a pretty low price.
> It's an okay model. My biggest issue using GLM 5.1 in OpenCode is that it loses coherency over longer contexts
Since the entire purpose, focus and motivation of this model seems to have been "coherency over longer contexts", doesn't that issue makes it not an OK model? It's bad at the thing it's supposed to be good at, no?
It does devolve into gibberish at long context (~120k+ tokens by my estimation but I haven't properly measured), but this is still by far the best bang-for-buck value model I have used for coding.
i have glm and kimi. kimi was in most of the cases better and my replacement for claude when i run out of tokens. Now im finding myself using glm more then kimi. Its funny that glm vs kimi, is like codex vs claude. Where glm and codex are better for backend and kimi and claude more for frontend.
as kimi did a huge amount of claude distilation it seems to be somewhat based in data
I'm curious how the bang for buck ratio works in comparison. My initial tests for coding tasks have been positive and I can run it at home. Bigger models I assume are still better on harder tasks.
That's pretty few, at least for the way I'm currently using LLMs. I have them do some Nix work (both debugging and coding) where accuracy and quality matters to me, so they're instructed to behave as I would when it comes to docs, always consulting certain docs and source code in a specific order. It's not unusual for them to chew through 200k - 600k tokens in a single session before they solve everything I want them to. That's what I currently think of when I think of "long horizon within a single context window".
So I need them to not only not devolve into gibberish, but remain smart enough to be useful at contexts several times longer than that.
Chiming in to second this issue. It is wildly frustrating.
I suspect that this isn't the model, but something that z.ai is doing with hosting it. At launch I was related to find glm-5.1 was stable even as the context window filled all the way up (~200k). Where-as glm-5, while it could still talk and think, but had forgotten the finer points of tool use to the point where it was making grevious errors as it went (burning gobs of tokens to fix duplicate code problems).
However, real brutal changes happened sometimes in the last two or three months: the parent problem emerged and emerged hard, out of nowhere. Worse, for me, it seemed to be around 60k context windows, which was heinous: I was honestly a bit despondent that my z.ai subscription had become so effectively useless. That I could only work on small problems.
Thankfully the coherency barrier raised signficiantly around three weeks go. It now seems to lose its mind and emits chaotic non-sentance gibberish around 100k for me. GLM-5 was already getting pretty shaky at this point, so I feel like I at least have some kind of parity. But at least glm-5 was speaking & thinking with real sentances, I could keep conversing with it somewhat, where-as glm-5.1 seems to go from perfectly level headed working fine to all of a sudden just total breakdown, hard switch, at such a predictable context window size.
It seems so so probable to me that this isn't the model that's making this happen: it's the hosting. There's some KV cache issue, or they are trying to expand the context window in some way, or to switch from one serving pool of small context to a big context serving pool, or something infrastructure wise that falls flat and collapses. Seeing the window so clearly change from 200k to 60k to 100k is both hope, but also, misery.
I've been leaving some breadcrumbs on Bluesky as I go. It's been brutal to see. Especially having tasted a working glm-5.1. I don't super want to pay API rates to someone else, but I fully expect this situation to not reproduce on other hosting, and may well spend the money to try and see. https://bsky.app/profile/jauntywk.bsky.social/post/3mhxep7ek...
All such a shame because aside from totally going mad & speaking unpuncutaed gibberish, glm-5.1 is clearly very very good and I trust it enormously.
But I used 70m tokens yesterday on glm-5.1 (thanks glm for having good observability of your token usage unlike openai, dunno about anthropic). And got incredible beautiful results that I super trust. It's done amazing work.
This limitation feels very shady and artificial to me, and i don't love this, but I also feel like I'm working somewhat effectively within the constraints. This does put a huge damper on people running more autonomous agentic systems, unless they have Pi or other systems that can more self adaptively improve the harness.
These comments are probably either by friends of the OP or perhaps associated with the project somehow, which is against HN's rules but not the kind of attack we're mostly concerned with these days. Old-fashioned voting rings and booster comments aren't existential threats and actually bring up somewhat nostalgic feelings at the moment!
I moderate a medium-sized development subreddit. The sheer volume of spam advertising some AI SaaS company has skyrocketed over the past few months, like 10000%. Comment spam is now a service you can purchase [0][1], and I would not be surprised if Z.ai engaged some marketing firm which ended up purchasing this service.
There are YC members in the current batch who are spamming us right now [2]. They are all obvious engagement-bait questions which are conveniently answered with references to the SaaS.
Z.ai Discord is filled to the brim with people experiencing capacity issues. I had to cancel my subscription with Z.ai because the service was totally unusable. Their Discord is a graveyard of failures. I switched to Alibaba Cloud for GLM but now they hiked their coding plan to $50 a month which is 2.5x more expensive than ChatGPT Plus. Totally insane.
Everyone has started either hiking their prices or limiting the tokens, gravy train is over. Glad we have open models that we can host; Sad RAM is so expensive..
I am on their "Coding Lite" plan, which I got a lot of use out of for a few months, but it has been seriously gimped now. Obvious quantization issues, going in circles, flipping from X to !X, injecting chinese characters. It is useless now for any serious coding work.
I'm on their pro plan and I respectfully disagree - it's genuinely excellent with GLM 5.1 so long as you remember to /compact once it hits around 100k tokens. At that point it's pretty much broken and entirely unusable, but if you keep context under about 100k it's genuinely on par with Opus for me, and in some ways it's arguably better.
100k tokens it's basically nothing these days. Claude Opus 4.6M with 1M context windows is just a different ball game
The Dumb Zone for Opus has always started at 80-100k tokens. The 1M token window just made the dumb zone bigger. Probably fine if the work isn't complicated but really I never want an Opus session to go much beyond 100k.
Claude Opus can use a 1M context window but I’ve found it to degrade significantly past 250k in practice.
I had thought this, but my experience initially was that performance degradation began getting noticeable not long after crossing the old 250k barrier.
So, it has been convenient to not have hard stops / allow for extra but I still try to /clear at an actual 25% of the 1M anyhow.
This is in contrast to my use of the 1M opus model this past fall over the API, which seemed to perform more steadily.
I’m genuinely surprised. I use copilot at work which is capped at 128K regardless of model and it’s a monorepo. Admittedly I know our code base really well so I can point towards different things quickly directly but I don’t think I ever needed compacting more than a handful in the past year. Let alone 1M tokens.
The cost per message increases with context while quality decreases so it’s still generally good to practice strategic context engineering. Even with cross-repo changes on enterprise systems, it’s uncommon to need more than 100k (unless I’m using playwright mcp for testing).
The context windows of these Chinese open-source subscriptions (GLM, Minimax, Kimi) is too small and I'm guessing it's because they are trying to keep them cheap to run. Fine for openclaw, not so much for coding.
Personal opinions follow:
Claude Opus at 150K context starts getting dumber and dumber.
Claude Opus at 200K+ is mentally retarded. Abandon hope and start wrapping up the session.
Don’t want to disappoint you, but above 200k opus memory is like a gold fish. You need to be below 150k to get good research and implementation.
Oh nice, I just wrote pretty much the same comment above yours.
Is manual compation absolutely mandatory ?
I haven't screenshotted to alas, but it goes from being a perfectly reasonable chatty LLM, to suddenly spewing words and nonsense characters around this threshold, at least for me as a z.ai pro (mid tier) user.
For around a month the limit seemed to be a little over 60k! I was despondent!!
What's worse is that when it launched it was stable across the context window. My (wild) guess is that the model is stable but z.ai is doing something wonky with infrastructure, that they are trying to move from one context window to another or have some kv cache issues or some such, and it doesn't really work. If you fork or cancel in OpenCode there's a chance you see the issue much earlier, which feels like some other kind of hint about kv caching, maybe it not porting well between different shaped systems.
More maliciously minded, this artificial limit also gives them an artificial way to dial in system load. Just not delivering the context window the model has reduces the work of what they have to host?
But to the question: yes compaction is absolutely required. The ai can't even speak it's just a jumbled stream of words and punctuation once this hits. Is manual compaction required? One could find a way to build this into the harness, so no, it's a limitation of our tooling that our tooling doesn't work around the stated context window being (effectively) a lie.
I'd really like to see this improved! At least it's not 60-65k anymore; those were soul crushing weeks, where I felt like my treasured celebrated joyful z.ai plan was now near worthless.
There's a thread https://news.ycombinator.com/item?id=47678279 , and I have more extensive history / comments on what I've seen there.
The question is: will this reproduce on other hosts, now that glm-5.1 is released? I expect the issue is going to be z.ai specific, given what I've seen (200k works -> 60k -> 100k context windows working on glm-5.1).
I have gone back to having it create a todo.md file and break it into very small tasks. Then i just loop over each task with a clear context, and it works fine. a design.md or similar also helps, but most of the time i just have that all in a README.md file. I was also suspicious around the 100k almost to the token for it to start doing loops etc.
basically my expirience as well. Sometimes it can break past 100k and be ok, but mostly it breaks down.
I am on the mid tier Coding plan to trying it out for the sake of curiosity.
During off peak hour a simple 3 line CSS change took over 50 minutes and it routinely times out mid-tool and leaves dangling XML and tool uses everywhere, overwriting files badly or patching duplicate lines into files
This is surprising to me. Maybe because I'm on Pro, and not Lite. I signed up last week and managed to get a ton of good work done with 5.1. I think I did run into the odd quantization quirk, but overall: $30 well spent
Every model seems that way, going back to even GPT 3 and 4, the company comes out with a very impressive model that then regresses over a few months as the company tries to rein in inference costs through quantization and other methods.
I'm also on the lite plan and have been using 5.1 for a few days now. It works fine for me.
But it's all casual side projects.
Edit: I often to /compact at around 100 000 token or switch to a new session. Maybe that is why.
I'm on their lite plan as well and I've been using it for my OpenClaw. It had some issues but it also one-shotted a very impressive dashboard for my Twitter bookmarks.
For the price this is a pretty damn impressive model.
I'm on their Lite plan and I see some of this too. It is also slow. I use it as a backup.
Is there any advantage to their fixed payment plans at all vs just using this model via 3rd party providers via openrouter, given how relatively cheap they tend to be on a per-token basis?
Providers like DeepInfra are already giving access to 5.1 https://deepinfra.com/zai-org/GLM-5.1
$1.40 in $4.40 out $0.26 cached
/ 1M tokens
That's more expensive than other models, but not terrible, and will go down over time, and is far far cheaper than Opus or Sonnet or GPT.
I haven't had any bad luck with DeepInfra in particular with quantization or rate limiting. But I've only heard bad things about people who used z.ai directly.
> Obvious quantization issues
Devil's advocate: why shouldn't they do it if OpenAI, Anthropic and Google get away with playing this game?
It has been useless for long time when compared to Opus or even something like Kimi. The saving grace was that it was dirt cheap but that doesn't matter if it can't do what I want even after many repeated tries and trying to push it to a correct solution.
I'm crossing my fingers they release a flash version of this. GLM 4.7 Flash is the main model I use locally for agentic coding work, it's pretty incredible. Didn't find anything in the release about it - but hoping it's on the horizon.
Unsloth quantizations are available on release as well. [0] The IQ4_XS is a massive 361 GB with the 754B parameters. This is definitely a model your average local LLM enthusiast is not going to be able to run even with high end hardware.
[0] https://huggingface.co/unsloth/GLM-5.1-GGUF
SSD offload is always a possibility with good software support. Of course you might easily object that the model would not be "running" then, more like crawling. Still you'd be able to execute it locally and get it to respond after some time.
Meanwhile we're even seeing emerging 'engram' and 'inner-layer embedding parameters' techniques where the possibility of SSD offload is planned for in advance when developing the architecture.
To be honest I am a bit sad as, glm5.1 is producing mich better typescript than opus or codex imo, but no matter what it does sometimes go into shizo mode at some point over longer contexts. Not always tho I have had multiple session go over 200k and be fine.
When it works and its not slow it can impress. Like yesterday it solved something that kimi k2.5 could not. and kimi was best open source model for me. But it still slow sometimes. I have z.ai and kimi subscription when i run out of tokens for claude (max) and codex(plus).
i have a feeling its nearing opus 4.5 level if they could fix it getting crazy after like 100k tokens.
Why is that sad? A free and open source model outperforming their closed source counterparts is always a win for the users
The non-awesome context window is the sad part, but I think a better harness can deal with this.
Isn't the same with opus nowadays?
After the context gets to 100k tokens you should open a new session or run /compact.
I honestly still hold onto habits from earlier days of Claude & Codex usage and tend to wipe / compact my context frequently. I don't trust the era of big giant contexts, frankly, even on the frontier models.
I also feel like its helping me on the big models these days with claude giving so many issues.
GLM-5.0 is the real deal as far as open source models go. In our internal benchmarks it consistently outperforms other open source models, and was on par with things like GPT-5.2. Note that we don't use it for coding - we use it for more fuzzy tasks.
I am working on a large scale dataset for producing agent traces for Python <> cython conversion with tooling, and it is second only to gemini pro 3.1 in acceptance rates (16% vs 26%).
Mid-sized models like gpt-oss minimax and qwen3.5 122b are around 6%, and gemma4 31b around 7% (but much slower).
I haven’t tried Opus or ChatGPT due to high costs on openrouter for this application.
Yep, haven't tried 5.1 but for my PHP coding, GLM-5 is 99% the same as Sonnet/Opus/GPT-5 levels. It is unbelievably strong for what it costs, not to mention you can run it locally.
Comments here seem to be talking like they've used this model for longer than a few hours -- is this true, or are y'all just sharing your initial thoughts?
My local tennis court's reservation website was broken and I couldn't cancel a reservation, and I asked GLM-5.1 if it can figure out the API. Five minutes later, I check and it had found a /cancel.php URL that accepted an ID but the ID wasn't exposed anywhere, so it found and was exploiting a blind SQL injection vulnerability to find my reservation ID.
Overeager, but I was really really impressed.
Yeah it seems they did not align it to much, at least for now. Yesterday it helped me bypass the bot detection on a local marketplace. that i wanted to scrap some listing for my personal alerting system. Al the others failed but glm5.1 found a set of parameters and tweaks how to make my browser in container not be detected.
That is both amazing and terrifying.
This is insane, I love it.
It's been out for a while.
Blog post is new but the model is about 2 weeks in public.
The focus on the speed of the agent generated code as a measure of model quality is unusual and interesting. I've been focusing on intentionally benchmaxxing agentic projects (e.g. "create benchmarks, get a baseline, then make the benchmarks 1.4x faster or better without cheating the benchmarks or causing any regression in output quality") and Opus 4.6 does it very well: in Rust, it can find enough low-level optimizations to make already-fast Rust code up to 6x faster while still passing all tests.
It's a fun way to quantify the real-world performance between models that's more practical and actionable.
One of the bench maxed models . Every time I tried it , it’s not on par even with other open source models .
I wonder how that compare to harness methods like MAKER https://www.cognizant.com/us/en/ai-lab/blog/maker
Share the harness for that browser linux OS task :)
I find the "8 hour Linux Desktop" bit disingenuous, in the fine print it's a browser page:
They claim "50 applications from scratch", but "Browser" and a bunch of the other apps are likely all <iframe> elements.We all know that building a spec-compliant browser alone is a herculean task.
In my opinion it would be way cooler if it actually created a real Linux desktop environment instead of only a replica.
Would it succeed? Probably not, but it would be way more interesting, even if it didn't work.
I find things like Claude's C compiler way more interesting where, even though CCC is objectively bad (code is messy, generates very bad unoptimized code, etc) it at least is something cool and shows that with some human guideance it could generate something even better.
It is a big claim without the source and prompting.
I am already subscribed to their GLM Coding Pro monthly plan and working with GLM 5.1 coupled with Open Code is such a pleasure! I will cancel my Cursor subscription.
How does it compare to Kimi 2.5 or Qwen 3.6 Plus?
The blog post has a benchmark comparison table with these two in it
Thanks, I missed that. It's very interesting. They're quite close, but I found Qwen 3.6 plus was just marginally better than Kimi 2.5. But looking at the stats I'll definitely give GLM 5.1 a try now. [edit: even though looking at it, it's not cheap and has a much smaller context size.And I can't tell about tool use.]
Compared to Kimi 2.5 or Qwen 3.6 Plus I don't know, but I ran GLM 5 (not 5.1) side by side with Qwen 3.5 Plus and it was visibly better.
It's an okay model. My biggest issue using GLM 5.1 in OpenCode is that it loses coherency over longer contexts. When you crest 128k tokens, there's a high chance that the model will start spouting gibberish until you compact the history.
For short-term bugfixing and tweaks though, it does about what I'd expect from Sonnet for a pretty low price.
I've done some very long sessions on OpenCode with Dynamic Context Pruning. Highly recommend it.
https://github.com/Opencode-DCP/opencode-dynamic-context-pru...
> It's an okay model. My biggest issue using GLM 5.1 in OpenCode is that it loses coherency over longer contexts
Since the entire purpose, focus and motivation of this model seems to have been "coherency over longer contexts", doesn't that issue makes it not an OK model? It's bad at the thing it's supposed to be good at, no?
long(er) contexts (than the previous model)
It does devolve into gibberish at long context (~120k+ tokens by my estimation but I haven't properly measured), but this is still by far the best bang-for-buck value model I have used for coding.
It's a fine model
i have glm and kimi. kimi was in most of the cases better and my replacement for claude when i run out of tokens. Now im finding myself using glm more then kimi. Its funny that glm vs kimi, is like codex vs claude. Where glm and codex are better for backend and kimi and claude more for frontend.
as kimi did a huge amount of claude distilation it seems to be somewhat based in data
https://www.anthropic.com/news/detecting-and-preventing-dist...
Have you tried gemma4?
I'm curious how the bang for buck ratio works in comparison. My initial tests for coding tasks have been positive and I can run it at home. Bigger models I assume are still better on harder tasks.
That's pretty few, at least for the way I'm currently using LLMs. I have them do some Nix work (both debugging and coding) where accuracy and quality matters to me, so they're instructed to behave as I would when it comes to docs, always consulting certain docs and source code in a specific order. It's not unusual for them to chew through 200k - 600k tokens in a single session before they solve everything I want them to. That's what I currently think of when I think of "long horizon within a single context window".
So I need them to not only not devolve into gibberish, but remain smart enough to be useful at contexts several times longer than that.
I wonder if running the compaction in a degraded state produces a subpar summary to continue with.
Have you compared it with using Claude Code as the harness? It performs much better than opencode for me.
Chiming in to second this issue. It is wildly frustrating.
I suspect that this isn't the model, but something that z.ai is doing with hosting it. At launch I was related to find glm-5.1 was stable even as the context window filled all the way up (~200k). Where-as glm-5, while it could still talk and think, but had forgotten the finer points of tool use to the point where it was making grevious errors as it went (burning gobs of tokens to fix duplicate code problems).
However, real brutal changes happened sometimes in the last two or three months: the parent problem emerged and emerged hard, out of nowhere. Worse, for me, it seemed to be around 60k context windows, which was heinous: I was honestly a bit despondent that my z.ai subscription had become so effectively useless. That I could only work on small problems.
Thankfully the coherency barrier raised signficiantly around three weeks go. It now seems to lose its mind and emits chaotic non-sentance gibberish around 100k for me. GLM-5 was already getting pretty shaky at this point, so I feel like I at least have some kind of parity. But at least glm-5 was speaking & thinking with real sentances, I could keep conversing with it somewhat, where-as glm-5.1 seems to go from perfectly level headed working fine to all of a sudden just total breakdown, hard switch, at such a predictable context window size.
It seems so so probable to me that this isn't the model that's making this happen: it's the hosting. There's some KV cache issue, or they are trying to expand the context window in some way, or to switch from one serving pool of small context to a big context serving pool, or something infrastructure wise that falls flat and collapses. Seeing the window so clearly change from 200k to 60k to 100k is both hope, but also, misery.
I've been leaving some breadcrumbs on Bluesky as I go. It's been brutal to see. Especially having tasted a working glm-5.1. I don't super want to pay API rates to someone else, but I fully expect this situation to not reproduce on other hosting, and may well spend the money to try and see. https://bsky.app/profile/jauntywk.bsky.social/post/3mhxep7ek...
All such a shame because aside from totally going mad & speaking unpuncutaed gibberish, glm-5.1 is clearly very very good and I trust it enormously.
> "aside from totally going mad & speaking unpuncutaed gibberish [...] I trust it enormously."
The bar is very low :(
I see where you are coming from.
But I used 70m tokens yesterday on glm-5.1 (thanks glm for having good observability of your token usage unlike openai, dunno about anthropic). And got incredible beautiful results that I super trust. It's done amazing work.
This limitation feels very shady and artificial to me, and i don't love this, but I also feel like I'm working somewhat effectively within the constraints. This does put a huge damper on people running more autonomous agentic systems, unless they have Pi or other systems that can more self adaptively improve the harness.
[dead]
[stub for offtopicness]
[[you guys, please don't post like this to HN - it will just irritate the community and get you flamed]]
Hmm, three spam comments posted within 9 minutes of each other. The accounts were created 15 minutes ago, 51 days ago, and 3 months ago.
Interesting.
Hopefully these aren't bots created by Z.AI because GLM doesn't need fake engagement.
These comments are probably either by friends of the OP or perhaps associated with the project somehow, which is against HN's rules but not the kind of attack we're mostly concerned with these days. Old-fashioned voting rings and booster comments aren't existential threats and actually bring up somewhat nostalgic feelings at the moment!
Thanks for watching out for the quality of HN...
Would love to read a Tell HN post about the kinds of attacks you are concerned with!
I moderate a medium-sized development subreddit. The sheer volume of spam advertising some AI SaaS company has skyrocketed over the past few months, like 10000%. Comment spam is now a service you can purchase [0][1], and I would not be surprised if Z.ai engaged some marketing firm which ended up purchasing this service.
There are YC members in the current batch who are spamming us right now [2]. They are all obvious engagement-bait questions which are conveniently answered with references to the SaaS.
[0]: https://www.reddit.com/r/DoneDirtCheap/comments/1n5gubz/get_...
[1]: https://www.reddit.com/r/AIJobs/comments/1oxjfjs/hiring_paid...
[2]: https://www.reddit.com/r/androiddev/comments/1sdyijs/no_code...
Z.ai Discord is filled to the brim with people experiencing capacity issues. I had to cancel my subscription with Z.ai because the service was totally unusable. Their Discord is a graveyard of failures. I switched to Alibaba Cloud for GLM but now they hiked their coding plan to $50 a month which is 2.5x more expensive than ChatGPT Plus. Totally insane.
Everyone has started either hiking their prices or limiting the tokens, gravy train is over. Glad we have open models that we can host; Sad RAM is so expensive..
[flagged]
[flagged]
[flagged]
[dead]
[dead]
[dead]