I don't know about good, I use a lot of local models and they're still pretty painful to run locally
You have dense models (qwen 27b, gemma 31b) who are pretty smart, but pretty slow
You have MoE models (gemma 26b, qwen 35b, north mini code 30b) who are pretty fast, but make a lot of mistakes
You need a lot of memory to run these well, quantization makes tool calling weaker, so most run at 4 bit quants and are wondering why it kinda sucks and that's because you've essentially lobotomized the model (I recommend unsloth quants, i recommend 6bit for MoEs and 5bit for dense)
So you need a lot of compute to make the pre-fill fast, you need bandwidth to make the decode fast, you need a lot of memory to hold everything - lot of ifs
On top of that, your laptop becomes a loud hot churning machine, it's uncomfortable to work with.
So are they good? not really. Do they work? yes
edit: just wanna clarify - i think open models are the future, i think they're super important, i'm contributing constantly to the ecosystem - i think people should play around with these models, i think people should use `pi` and learn how it all works - but don't download a model expecting it to be good out of the box, you will have to tune and configure a lot of stuff to replace a "coding agent" that most people are using models for
This is basically my experience as well. I have a moderately recent but high spec desktop (Radeon 6900 XT with 16 GB VRAM, Ryzen 9 7900X 12-core, 64 GB system RAM), and I tried out some recommended models with ollama a month or two ago. Anything not geared specifically towards coding seemed to struggled with actually making tool calls instead of just stating the actions they would take without making them (and trying to get help from them to explain what I needed to configure to change that behavior was useless; qwen refused to believe that it was running in ollama and insisted that it was running from the Alibaba cloud without access to my local system), and the models intended for coding were barely thinking faster than I could type (if they had any ability to show thinking at all).
The best "free" experience I've found is using OpenCode with Big Pickle. It's not especially smart, so it often won't produce the correct result the first time, but the free tier is generous enough that I don't think I've hit the limit more than twice over around a month with frequent multi-hour sessions. If running locally is truly the goal, it's not going to fit the bill, but if the goal is just "get the best experience without having to pay for a sub or tokens", it's the least bad option I've found so far.
For what it is worth, I’m on a similar machine. (9070XT,5900X) and found a lot of performance improvement over ollama by compiling llama.cpp and running with —no-mmap and —perf. The context is still quite small though. With online models I use contexts of at least 200k which is useful for longer running/more complicated commands.
Locally I haven’t gone much further than 8k. That is sufficient for small changes on small code bases. And you need condensed tool output.
I haven’t tried any tool that compresses the tokens yet.
Try llama.cpp it seems to be a lot more performant and a lot more hackable.
Also I'm surprised how substantial the impact of some of the inference configs (beyond just temp) can have, though this is much more model specific.
> The best "free" experience I've found is using OpenCode with Big Pickle.
I have absolutely zero interest in free. I honestly don't think I'm even remotely in the same demographic as people using free tiers / models.
I want to pay. I don't want my data used for training. I want it to be open. I want it to be consistently up (more than Claude!). I want it to be fast. I don't want it to be subsidized as that's just an excuse for shitty quality. Deepseek flash knocks it out of the park on all of these except you're data is used in training. I'm fine with it being hosted since there's no way I'm using it 24/7, but data MUST be private.
Basically I want Hetzner and OVH to run open model clouds. I'm convinced this is going to happen eventually when everyone realizes this is a commodity.
You can pay, and also use deepseek-v4-flash. OpenRouter even lets you "block" or limit your usage to providers that don't train on data. Since the weights are open, other companies are already serving the model on non-DeepSeek owned hardware: https://openrouter.ai/deepseek/deepseek-v4-flash
Good to know. I hadn't checks since early is DS4's launch when they were the only provide (I think maybe there was one other, but they also trained on your data). I see several private options now.
Yes, but I think that'll change eventually. If you trust hosting your code with a specific cloud provider then you'll probably also trust them for code assist. At least that's my theory.
There'll probably need to be a threat of massive litigation should they fail to comply with such a policy.
I found that, with the heavily quantized Qwen3 models I can cram onto my 3060 Ti, telling the model to use its tools in the system prompt made it a lot more likely to actually do it. YMMV of course, but give it a shot.
IMO running local models "well" still requires an expensive hardware investment. You really want 96GB of VRAM on a modern Blackwell arch to run these models with decent KV cache. Trying to run them on a unified memory Mac, an AI Max AMD processor, or a DGX Spark-alike is really just asking for trouble. Prefill kills perf.
If you throw the right GPUs at the problem, they become much better - but still not quite in the realm of Sonnet or DeepSeek 4 Flash, let alone Opus / DeepSeek Pro or Mythos/Fable/GPT-5.5.
Given enough budget, power, and cooling, you can run some pretty good data pipelines, but for code, I think it still makes sense to shell out to an API provider most of the time.
Depends what you need the model to do. The recent granite4.1:3b just takes 2GB of memory and is fast. Results are pretty good and support tool calling. Barely a squeak out of the Mac laptop.
Even faster with the MLX builds.
Then when I need more heavy lifting I fire up a larger model.
IMHO the issue isn't the models. I've had OpenClaw give the same results as Claude using open models locally. Slower but does the job. Something that can do optimal model switching is what's needed.
Ultimately if you skip over the opportunity to play with these models on your own machine you are losing out on a lot of really interesting educational opportunities — it helps make a lot of stuff feel more concrete in a way that only tinkering can.
But then I think once I had an idea of something that I was building against Gemma 4 or Qwen 3.6 I would be looking at openrouter etc., to stabilise it for the next tier of experimentation (and to get back a kind of multi-device access without tailscale/lm link etc.).
Are they good enough to replace what people seem to want to do with Claude? Maybe not. But it's an unparalleled learning opportunity.
If I could just save up $6000 I could sell off my RTX 5090 for $4,000 and buy an RTX 6000 Blackwell Pro Workstation. I can fit models into the 32GB of vram but my context window ends up being tiny for any halfway capable model.
Maybe we shouldn't be running these models on laptops with their thermally constrained form factor, and we shouldn't expect quick inference on a par with a large cloud-based platform either, at least not for near-SOTA model quality. It's still worth it to avoid becoming massively reliant on centralized services.
I have a 5070 12 GB laptop GPU and can hit 72 tokens per second in the first couple thousand tokens before dropping to mid-high 50s after about 15k context.
This setup is extremely optimized down to the last flag. Changing any param above the temp flag craters performance.
I don't have enough system RAM to properly handle the large context windows so I don't use local models.
Can you comment on the quality and accuracy of it? People have managed to run Gemma 26b without GPU on old CPUs but I don't think quality is anywhere close to what Gemma 12b offers.
I'd agree that the quality degrades a lot between Q8 and Q4, borderline unusable as they start to fail with tool calling syntax even. Personally I'd say Q8 is as low as you want to go.
q4 isn't rubbish, but it's a compromise for a good value, q6 is essentially a no-compromise quantization and it's what i recommend for MoEs in my experience for agentic workflows
You're 100% right and its even severe than that: I daily drive on xhigh. I really try to avoid it, but when reconciling APIs across two large codebases you really start pressing north of 200k. I find myself topping out at 800k sometimes and that's with careful context management. I actually had to drop to GPT 5.4 for 1M context in my subscription because GPT 5.5 tops out at 272k. Hitting 800k context is better than repeatedly hitting let's say 200k out of 272k with multiple rounds of compaction. I run Can's snapcompact and while its better than normal compaction it still lobotomizes the model more than running with a very high context window.
Gemma 4 is particularly good at pipeline/automation tasks.
It outperforms all the Qwen models (even 100B+) for rule following/automation style tasks in my experience. Its image interpretation is also very good, and out-benchmarks Opus.
Qwen seems to ignore instructions and consistently outputs incorrect formats (when token generation format is not explicitly constrained)
But yes, on the DGX Spark Gemma 31B Q4 with MTP runs around 20 tok/s and Gemma 26B A4B around 60 tok/s. Still quite slow. But on a high end Nvidia card would run significantly faster and still fit in memory.
I'd recommend for anyone getting into local models to focus on memory bandwidth over RAM. Models under 100B parameters are now sufficient and hugely useful for automation.
I agree that for coding/creation use cases, there's still not a compelling argument for local models.
But e.g. if you want to scan a list of stocks and interpret news/high pass filtering, interpreting logs, interpreting screenshots, the local models are more than sufficient already.
This is not my experience at all. Even the Nous Research guys have stated that "Qwen3.6-27B is the canonical local model to use Hermes Agent with" [https://old.reddit.com/r/LocalLLaMA/comments/1sz2y76/ama_wit...]. I am finding the same when used with Pi and OpenCode.
I'm talking about automation generally, not agent loops.
E.g. prompt A to achieve X, output in format Y. Use Y to do something in prompt B.
Agentic loops will underperform deterministic control flow pipelines (with non-determinism constrained to LLM calls).
Agents are more general, which is the main advantage. But inherently a more general solution will waste context on unnecessary reasoning.
Try asking the smaller Qwen models to output a JSON in a specific format. It basically can't do it consistently with a moderately sized prompt unless you constrain the token generation via GGML or are extremely repetitive and specific about it. (Thinking disabled)
Gemma 4 will do it correctly pretty much 100% of the time. (Thinking disabled)
Applies to other rule following as well in my experience.
Qwen may be better at toolcalling and certainly probably codegen.
It seems to me Google explicitly designed Gemma for edge device automation, and didn't fine tune for agentic or coding use cases.
Yep agreed completely. I couldn't imagine torturing myself with a small model for local coding. But Gemma 4 31B is so fucking good for a variety of language modelling tasks.
In my mind it’s a question of knowing what you want to build and how to divide the project into tasks your local setup can handle.
If you don’t need the machine to respond instantly (or explain your own business model to you) everything can be local and it’s been like that for a few years now.
A median laptop is no bueno for running a reliable model(which will be qwen 27b as per my reading here and r/localllama). Powerful macs would be prevalent in certain areas of the world but in rest of the world personal machines aren't always that powerful.
I largely don't disagree with you but come to a different conclusion. I have two systems:
1) a "programming desktop" with a $500 upper mid range Ryzen (idr exact), 8GB VRAM Radeon card I bought solely for RuneScape, and 64GB ram
2) a maxed out Alienware 16 Area51, so it's a 5090 with 24GB vram and 64GB system ram. I bought it for gaming, of course.
I run qwen 3.6 35B A3B Q6 with 200k context window. I compare this to Claude pro max or whatever that I use at work.
The main difference between the machines is that the one with the RuneScape gpu does 10 TPS while the Alienware does 30-40tps. Both are fine though the 30-40tps is obviously a lot snappier.
I find with both models that:
- they do really well at "be a 30GB zip file of reddit and stackoverflow answers"
- they do really well at point fixing random bullshit errors that would otherwise waste my time (this is related to above of course)
- they do quite well at, given a pretty good specification of what you want, figuring it out, even if you've specified several steps needed
- they both cannot really be given a large ish task and left to just drive it on their own
The main difference between the two is with that last one, Claude is somewhat better and figuring SOMETHING out, but if Claude is having to figure it out, it's probably because I don't know what I want and it's very likely to not make a sane choice, and will generally produce slop given even the slightest amount of leash still.
I've also found that the boundary between "well specified small to medium thing" and "idk just do thing and figure it out" is the difference between you keeping control of the code and losing control. There's an "escape velocity" of AI use that, when you hit it, you're doomed to slop forever. (Or you have to deorbit... enjoy that).
So, are these models "worse" than Claude? Yeah. Am I looking forward to continued improvements? Yeah. But I now also have no desire to pay anthropic any amount of money, which has the nice side effect that i won't be helping them end up with so much money that they can distort our democracy.
Depends on what you mean by "local". On your Macbook, large dense models like Qwen 3.6 27B will be slow, sure. On a local workstation with a dedicated RTX card you can get > 100 tps, which is more than good enough to work with it, and faster than cloud models in many cases.
Quantized Gemma 4 26B is as smart or better than GPT 5 in most of my testing. Granted GPT 5 is nearly a year old at this point, but I can run Gemma 4 on a ~6 year old consumer GPU (RTX 3090) and get 140 t/s.
It is smart enough that I use for all my coding tasks, and a lot of other mundane tasks.
It is probably not smart enough for "design this whole architecture of this complex system from scratch, make no mistakes", but that is not something I want from a coding tool anyway. I want a model that I can point to a file and tell it to make some changes to the file and related files. Or that I can ask to review a PR with regards to certain aspects.
My suggestion is to simply try it and see what it feels like.
I find devstral (even though it’s weak generally) much better at writing and documentation than Opus. I’m actually now delegating all documentation to devstral and away from Claude, which makes a mess.
A highly skilled carpenter may be able to 'get work done' by banging nails in with a heavy-bottomed cocktail glass, doesn't mean it's not painful to do so when it is continuously breaking and leaving shards of glass all over the workshop for you to find every day for the rest of your life until you clean up the mess you made using the wrong tool for the job.
More like, a highly-skilled carpenter can work miracles with a $6 hammer from the hardware store, while the pros on the commercial crew are using fancy compressed-air tools.
The carpenter has to get up close and personal with the wood. He can't match the crew's throughput, but maybe that's not what he's trying to do.
Nah, you can run the 24b - 35b class with between 90k and 256k of context with about 40GB and they are pretty good. Especially the MOE variants fit neatly in 40GB.
Modern inference engines can stream in weights from SSD in order to save on RAM, but this makes inference very slow, especially for the trivial single-session case. (Jury is still out on whether batching multiple sessions together can mitigate this well enough, but even then that's mostly helpful for the "running lots of inferences overnight and getting fresh results first thing in the morning" case. Which is interesting (the big third-party suppliers don't really offer a way of doing this at reasonable cost) but a bit of a niche.)
4 bit unsloth quants are good if you never ask for more than 20k context, use it as autocomplete on steroids, and never delegate serious questions to it
They are good if you were clever enough to buy a powerful enough rig before memory went up. For everyone else I say just wait. M1 Ultra 128GB and higher is sufficient to run gemma4:31b-mlx or qwen3.6:35b-mlx with subagents. It’s only slow if you don’t know how to plan your work effectively.
maybe painful if you are using it like a chatbot. you are sitting there waiting for response. vs ambient ai like automatically classifying your family pics and discarding random things like parking floor number pic.
i use it usecases like that latter and they are fine.
After having been a happy user of Qwen3.6-27B for a few weeks, due to being away from the hardware, I'm currently forced to use Claude Sonnet 4.6
It is such a downgrade. I don't understand how that's even possible.
The thing has so many strongly-held opinions I did not ever ask it for, talking just way too much and generally feeling somehow dumber.
Of course, being significantly larger, it will encode more knowledge, but that doesn't help me when I hate talking to it.
And all that on top of the fact that talking with it costs real money.
I wonder what it might be that makes me hate it so much.
Maybe because it doesn't see itself as a tool but almost an equal? As if its opinions would have weight.
Qwen too can act like an overeager intern, but if you tell it that it is an idiot, it will drop that ego. Not so much with Claude. In my experience, anyway.
I haven't spent a dime on cloud inference, so cannot make a direct comparison like you. But I can 100% attest to the fact that Qwen3.6-27B is a very capable local model for coding tasks. Over the last month and a half I've been using it almost daily, either on my M2 Ultra or on my RTX 5090 box. I use it for small mundane tasks at ggml-org [0] - nothing really impressive, but definitely a helpful tool for a maintainer. I think I would be using it much more, if I didn't have to spend a lot of my time on reviewing PRs. Currently, I have a very lightweight harness - the pi agent with everything stripped (`pi -nc --offline`) and a short system prompt [1] to align it a bit with my style. About the generation speed: ~100-150 t/s on the RTX 5090 and ~40 t/s on the Mac. I definitely prefer running it on the RTX machine - it's so much faster. But for the sake of testing and getting wider experience with local configurations, I often run it on the Mac too.
I also confirm that local inference is on par with proprietary cloud services (with a bit of local setup, simple agents.md and some utils skills). This local models come with tools, that's mind blowing, considering that some months ago we had to .md tools ourselves.
What makes a model worth even more is "Memory". We implemented that long ago. Last time I used proprietary services was 3 months ago, don´t really need it, my subscription is going blank.
Gerganov, hope you will consider developing further the CLI cause we suffering with the server.
> About the generation speed: ~100-150 t/s on the RTX 5090 and ~40 t/s on the Mac
Curious if you can share the prefill speed too?
I run locally on a crappy desktop (some AMD iGPU with Vulkan llama.cpp, 32 GB DDR4 RAM) for experimentation. I get 15 tok/s on generation for the qwen & gemma4 MoE models. I get around 150 tok/s prefill speed.
Reason I'm asking about the prefill is looking at my stats at work, I use between 20M to peaks of 300M input tokens daily. Some of those token are cached but in general, I seem to have roughly 500x more input tokens than output. So interested in prefill tok/s stats.
Btw, based on your numbers, I think our use cases are quite different. I use the agent for very targeted sessions - basically things that are clear to me how to do, just want to automate them. My workflow is usually: new session -> read this, this and this -> do that. I.e. I don't let it wander at all in the codebase, so I rarely exceed the context window.
Also, I get a lot of mileage from the ngram-based speculative decoding functionality [0] as it allows me to iterate on the implementation much faster.
I do use it the same way as you're describing on personal projects at home, in a very crude manner (pasting code snippets in llama server web UI prompt. Next will attempt OpenCode)
At work I use it in similar manner with more mature tools, but the vast majority of token spend comes from a totally different workflow: "pretend the AI is a fleet of junior/intern engineer you're delegating work to", where the agent will on its own do the implementation, commit the changes etc.
It does indeed spend a lot of tokens wandering the codebase, talking to MCPs, loading skills etc.
As a baseline, I run all models in Q8 [0] because I want to be confident that when I observe a problem, the root cause is not due to the quantization. However, in this specific case, I use Q8 on the mac and Q4 on the RTX machine because the latter does not fit the full context at Q8. So far, I don't have conclusive evidence that the Q4 quantization affects the quality in a significant way for this model and the tasks that I am using it for.
Yep, I daily drive Qwen3.6-27B (including for work), have done pretty much since it came out. IMO it's the only (small-ish, local) model worth using, if you can run it. It might not be as good as Opus at "add X large feature" but I don't want that in a model. I want to do the thinking while it does the typing. And Qwen 3.6 27B is perfectly good at that (while in my experience models like the 35A3B and gemma are significant downgrades)
Plus, I never have to worry about rate limits, quotas, or sitting in a queue during peak time. And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
Running on 2x 3090, 500-1000tok/s prefill and 60tok/s output at Q6_K_XL with MTP on llama.cpp, 220k tokens context window (starts to get a bit dumb above 160k ish), no KV quantization
> And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
For this reason I wonder if local models are a potential business opportunity. Provide the service to engineering teams to give them a pre-built and setup GPU rig they can run in a closet. No need to worry about all the things you mentioned and clients can rest-assured their data isn't disappearing into a sketchy data center. There might be regulatory reasons that make on-prem setups appealing as well.
I think that's overstated, but the loss of trust companies have with the big AI players is pretty serious. Not a big deal if your app is for sharing cat videos, but if you're medical or wealth management or a government contractor or the like enterprise clients really like to see good data security policies.
I think the next step to anyone but overbloated USA models is to follow https://chatjimmy.ai/ with one of the qwen models. If they can mass produce something at relative cost, these would be awesome sidecars.
If open models can ever hold roughly 600k token windows, I'll be really excited, I found that around 300 ~ 400k of Claude reading through your codebase results in better outputs. I also have Claude read official docs instead of "guessing" as to how to do something.
I think we'll get there. Right now it works for me, because I'm naturally pretty verbose in my prompts, and know the codebase well, so I know what it needs to look at. Plus subagents for anything exploratory.
I think deepseek v4 pro has 1m context and does pretty well up to around 600k. But if you have the hardware to run that locally, you already know
Even then if there's a smaller model with 1M context, you'll need a ton of RAM to actually run it at full 1M. I guess that's why you don't see it too much. Anyone that could run Qwen 3.6 27B with 1m context would be better off running a much bigger model with smaller context instead, in the same amount of VRAM.
In terms of optimizing further, huge context + KV quantization sounds like a terrible idea, but there's some decent innovation in sparse attention, KV cache rotation allowing Q8 to perform nearly as well as full 16-bit precision, plus some ideas around offloading KV cache to system RAM (but I'm skeptical)
I don't really think you're making reasonable decisions at that size; but I suppose if you're not allowed to refactor it, maybe.
I think the way these models work excludes sane behaviors the larger the context gets as each token introduces potential ambiguities between "USER" and "SYSTEM" messages leading to all the catastrophic behaviors.
Anyway, with AMD395+ I'm finding ~100k is both speed and context usefulness unless it's scoped tightly. with opencode, I manage it with dynamic context pruning: https://github.com/Opencode-DCP/opencode-dynamic-context-pru... ; then anything I touch ends up being refactored so context doesn't get bloated with unecessary functions, etc.
Obviously, this isn't compatible with certain business codebases, so I can see why bloat meets bloat.
are you running an NVLink? I have the same setup but no NVLink and it feels like it's best just splitting the 3090s to run separate models concurrently. But I also have no idea what I'm doing.
Do you have any resources on hardware necessary for running models and tweaks? I see you mention 2x 3090 and I wanted to do more search on what hardware is satisfactory for what models.
OMG this is such an annoying property, just shut the hell up please, and be concise.
I suspect that this is an artifact of the thinking property, but please just summarize the thinking process far more concisely, where a single sentence answer is more than sufficient the frontier models seem devoted to going on to a minimum of 5 paragraphs and offering 3-5 new directions.
And requests to please only offer a single step at once, or single option at once, or to even stop eagerly offering future directions is really hard to prompt correctly.
And look, there I did exactly what I was complaining about...
I'm not sure to what degree you can influence how a model thinks, but you can definitely hide the thinking tokens and tell the model how you want it to talk to you.
For example, the Claude web UI has an Instructions field where I have told it never to congratulate or praise me for asking questions. Earlier Copilot models used a ridiculous number of emoji and bullet lists when answering literally every prompt, I told it to knock that off and prefer detailed paragraphs in prose.
Local agents/frameworks/whatever all have their equivalents for overall user preferences.
Thanks for the reminder! For others looking for this setting, it is currently under User Menu (click your account name in the lower left), then "Settings", then the "General" tab there's an "Instructions for Claude" box.
Asking Claude for this provides incorrect instructions for me, so I'm guessing it moves around a lot.
Yeah, I've tried, and I'm sure somebody is going to say "skill issue" but it's not so easy to get the model to do that. Maybe it should be a SKILLS.md issue.
Edit: also, how can I stop the LLM from all this fake glazing, as if every question I have is some sort of unique genius insight, it's so damn annoying. I just got the third straight round of this while merely trying to get summarization of a PDF:
> Good question — it gets right at a real tension in the paper. Let me check the current state of actual SV-imputation efforts, since this has moved since 2020.
I didn't try telling to be concise and stop pampering me yet (but good idea, tomorrow), however I found that instead of me writing agent instructions, it works much better if I tell claude to write instructions for itself. I do check if they make sense of course, but its wording works much better than mine.
If you think about it, they're splitting the power across millions of users. Essentially, these AI companies have YOUR hardware that YOU are paying (them) for in a cabinet at some data center. This means the hardware could easily be run locally for inference for these 'big' models. It's just a problem of dynamics-- RAM is being bought in bulk by these companies through these B200 style cards, instead of sold slowly through the open public markets.
This is likely due to a combination of mass funding for the AI companies, but also they are trying to governmentally restrict which countries get access to these cards so certain countries get a head start. The only way to lock that down is to have them literally locked in their own GPU prisons (data centers). Third reason is it does make it possible to train the models faster by having them in the same data center connected directly. Having them distributed to everyone would slow down training considerably.
The current way to 'own' decent RAM and GPUs right now is through the stock market it seems.
Funny that coding agents have personalities, including "that colleague" you want to avoid even if you know they're probably quite good at what they do!
Opus in my experience is equally unpleasant "character"-wise, but at least it actually gets stuff done more often, so it's at least slightly more earned at that.
It's still a neurotic cargo-culting dogmatic idiot, but one that at least sometimes does produce deliverables instead of only bottom-tier HN-esque opinions.
Hmm. I think I might just fundamentally disagree with Anthropic about the idea of what a "tool" should be.
There's a model on Huggingface where someone takes Qwen and makes it think Opus style, and that one seems to be decent, not sure if they have the 27B variant in that style. I do wonder if you can tweak your system prompt to force Qwen to behave better?
Sure, but my argument still holds, the idea is that Qwen reasons the way that Opus on High (what is now Max or whatever?) level thinking to reason about problems instead of its standard approach.
Seen that one too, same guy I'm thinking of too, havent had a chance to try all of their models. For anyone curious I believe the username is Jackrong on huggingface? They've got several models out on there each focused on programming from different approaches.
Curious if you have tried custom instructions. I was never quite as unhappy with Claude's voice as you appear to be, but there were several things I didn't like. A custom prompt fixed almost all of them.
I think it would be very hard to convince someone to pay $100/mo to go back to Claude if they have a local model up and running, particularly now that model improvement has basically been stalled for the last 6 months. It’s so easy to set it up for yourself now too with things like LM studio. That said, there will always be unsophisticated users who can’t figure it out, so there will always be someone there to pay.
The person I was replying to specifically said that the Claude will "encode more knowledge" and that their problem was that they didn't like talking to Claude. It sounds like they think that Claude is at least slightly more functional. And the "not liking talking to it" is probably fixable. Someone for whom a local model works, and for whom the economics make sense, should absolutely run a local model and I wouldn't try to convince them otherwise. I'm sure it's the right choice for a lot of people. But not liking the personality of Claude is probably not a great reason on its own, given the minuscule amount of effort it takes to fix.
I’m probably the third category. I like experimenting and trying different models and techniques. I want api access for my own apps and Claude subscriptions don’t have that.
Sure I could splash out a ton of money for a high ram Mac, but deepseek is so dirt cheap that I think depreciation on a high end machine costs more than my api spend.
Example of what I’m using it for: building a semantic database of podcast content (podcast discoverability sucks on an episode level). I need a cheap LLM, an embedder, a transcriber, none of which Claude will do.
My api costs for coding agents plus running apps are about ~$20/month, but I get more than just chat + Claude code.
If all I was doing was pumping an employers codebase through a coding agent, Claude would be the answer.
Depends on which variant you pull down, but a single 5090 GPU (I know these are insanely expensive, but for context) could run either the Q8 or Q4_K_M version. It will not fit the 52GB version (BF16) on the other hand. So any modern Mac with a Pro or better processor and more than 52GB of RAM (don't forget VRAM for context window also matters!) would suffice, as someone else noted, probably a 128GB model would do the trick, and give you enough wiggle room to max out the context window.
My Mac only has 16GB of VRAM (20GB total - 8 is reserved for the OS) so I have to leave room for VRAM, I usually find a model that fits in 5 to 7 GB of VRAM and then max the context window as much as I can.
I recommend MacBook M5 Max with 128 GB of RAM to run it comfortably and fast. If you have something like a regular M4, go with qwen3.6-35b-a3d - the Mixture of Expert architecture makes it run 2-3x faster than the 27b version.
I noticed Fable was quite a bit terser, and I think it's due to changes in the system prompt [0]. They're literally saying "just give me the TLDR" and "give brief updates". You can tweak a lot of that with an AGENTS.md.
Nice! Do you do anything with that compute when you're not actively using it? Is the crypto-mining hobby still worth it? I've also wondered if such expensive hardware can be rented back out to offset cost. Looks like these cards are going for as much as $4k nowadays.
I've paid ~2k€ in 2023. Since I'm usually sitting next to it, I'm only using it when I want to use it. It can get quite loud and warm.
Crypto (to my knowledge at least) moved away from GPU mining.
I guess you could maybe rent out GPU compute, but - being in germany - it's not worth the legal hassle.
You could of course always commit tax fraud, though I wouldn't recommend that.
Well but comparing with sonnet 4.6 instead of opus 4.6,.7 or .8 doesnt make a real point
I mean, pay 200 USD/month (if you have that cash, or your company has it), might not justify using local at all (unless you have some reason to suspect about data leakage)
The Anthropic models have always been annoying this way -- chatty/opinionated and Dunning-Krugerish. And love to run away and do things unprompted with me jamming my ESC ESC ESC key over and over so I can get a word in edgewise.
FWIW Codex/GPT models are way less this way. Maybe to a fault.
I'm setting up my DGX Spark to try Qwen 3.6 27B again, as I'm hearing a lot of good reviews. When I tried it some time ago it was still early for support in llama.cpp.
This is the kind of thing that Anthropic et al should be worried about. As it becomes easier and easier to run local models, the ceiling of what they'll be able to charge will get lower and lower. Not that nobody will be willing to pay $$$$$ per month, but a lot of people are going to multiply the per-month charge by 12 or 24 and say "Could I set up a local model for less than that, and have it pay for itself within a year or two?" And if a significant portion of customers decide to buy instead of rent, the companies whose business model is entirely centered around renting will suddenly find themselves hurting for customers.
The opposite of that has been happening for 20 years now with cloud compute.
It won't happen with AI models either.
It's almost ingrained in the American business model now. Outsource everything. Nobody wants to manage a room full of servers when they can spend 2-3x as much and outsource that headache along with the responsibility for it.
Same will happen with AI. Whether that means paying Anthropic that premium or paying AWS.
I'm in a relatively small business, we recently had an outage related to our local infrastructure.
I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Everyone wants to shuck the chore and the responsibility.
> The opposite of that has been happening for 20 years now with cloud compute.
It won't happen with AI models either.
AI is different.
Cloud computing genuinely is cheaper on average. It's better than paying for cisco servers, and at scale, it's cheaper than managed platforms (ala Heroku), and it's a coin toss for when you're in the middle ground and constantly approaching the point of rebuilding poor-man versions of existing products but with very very expensive engineering salaries.
In contrast, local models offer dramatic savings, and are magnitude of orders better in certain aspects: like stability - the performance is all over the place with traditional AI companies as they divert compute to their next big thing.
The benefits to maintaining your own infrastructure are pretty moderate to low, with very high risk.
And also, alternate models are pretty easy to use and easy to swap out unlike the vendor lock-in that exists with cloud services.
For many companies (country-dependent) that's not really why they use cloud services vs purchasing. It's tax shenanigans and business process overhead. OpEx vs CapEx, and a small (%) bump in the huge AWS bill no one will even notice or a $30k+ invoice for hardware that has to go through rigorous review and 3 departments.
Same reason people pay for things through the AWS marketplace (like Vanta) instead of having to go through their invoicing process.
It's just not comparable though is it? You need cloud services because it's physically impossible to use your single home computer as a server, CDN, load balancer, mass storage, security service, and distributed system.
But AI is just weights, you can run a reasonably intelligent model at home, or on a few GPUs if you're a small-medium sized company, and it doesn't require dedicated maintenance.
> I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Same here. My job as a software dev does not require me to self-host services we need and use. Quite the opposite. But, I am reluctant to hand over all control to AWS or equivalent for several reasons that I will get into here.
I have found that Infrastructure as Code (IaC) and modern tools like opentofu, ansible, combined with frontier AI models and harnesses gives you superpowers in this space. Almost all of our self-hosted services are fully managed by these tools. e.g. We perform backups and test them more often now than we ever did before. Entirely because it is so much easier to do all of that now.
That's an interesting take, however there is no ongoing maintenance related to local models, maybe the only effort is giving more capable machines to the workforce; but yeah I can see how it might feel like a barrier.
The hardware, the power systems, the cooling systems. They need maintenance.
The OS needs updates, file systems get corrupted.
Fans get dirty.
All the things that you need to deal with in hosting your own server infrastructure you have to deal with when hosting your own AI infrastructure (which runs on servers...)
However, you can get many of the benefits of a "local model" by outsourcing all the hardware maintenance but still using an open model. Guaranteed repeatability for one.
A lot of the reason people outsource normal software is its brittle security properties, not sure that even applies to an LLM - it can go and look up the latest security best practices just like an engineer can.
outsource that headache along with the responsibility for it
You know what gives me headaches? When I'm in the middle of a session and the model gets rug-pulled out from under me because somebody at the model provider didn't pay the Trump bill that month.
Or when someone at the model provider decides that the curve-fitting algorithm in my graphics package looks a little too much like Skynet for comfort.
Or when they do any number of other things to undermine my work for the sake of their business model, some of which I won't even notice until the damage is done.
The sad thing is, if you know how inference works, you know that it really is insanely wasteful for everybody to run it locally. If anything naturally belongs in the cloud, it's inference. But at the same time, what choice are we being given?
Anthropic isn't just renting out compute, they're renting out a closed model that's better than anything you can download for free. So they're rightfully focused on preventing others from distilling their model.
I'm curious when coding-heavy companies will start running their own on-prem AI clusters. Has anyone had the idea to sell something like 4 GPU machine an engineering team could throw in a closet somewhere and run whatever they want on it? I imagine this won't appeal to everybody but with the trust issues the hyperscalers have developed hoovering up people's data and using it to train their models, I imagine some will find value in a machine and model they have transparent control over including the option to walk over and unplug the thing.
They are working hard on you not being able to run a thing locally. OpenAI buys all RAM on the spot market, causing the rise of RAM/VRAM prices 6x, making GPUs and decent computers unreachable for the majority of the population. OK, some richer folks might be able to get a 512GB MacStudio or a single RTX Pro 6000 for 13k and be able to run some decent local models, but the vast majority will need to use API. And at some point Nvidia might say: "We don't sell that many 6000s, so let's just cancel them altogether as we can gain 4x profit on datacenter-only GPUs" and then they'll become unobtainium and no private person would ever be able to run anything decent (~1 year behind the frontier) locally.
The general consensus is that local models will continue to improve drastically, but hosted models will as well. There will _always_ be a pretty big gulf of capability between what you can do with a desk full of hardware at home vs a few racks of hardware in a datacenter. That seems to be the real "moat" of hosted models at this point in time: access to capital.
What's interesting/exciting is that local models are _already_ quite good at tasks we never imagined AI _ever_ doing before ChatGPT hit the scene just a few short years ago.
We're also in an interesting point in time where companies are releasing the fruits of their research/labor (the LLMs) to the general public for free. For now, I think they see it in their best interest to gain mindshare and rapport, as well as advancing the state of the art in smaller LLMs ("a rising tide lifts all boats") but I fear and expect that these will dry up as the major players buy the minor players, and all will seek a return on their considerable investments in AI research.
I believe there's a level of diminishing returns. Sure, SOTA will probably always benchmark better than local models. But do we need it? That's the question that the likes of OpenAI and Anthropic should be worried about.
The difference won't be in the individual tasks. It'll be in the scale of job they can take on and how you interact with the model. Think of pairing with a junior vs replacing a full delivery team, that's the sort of difference we'll be looking at. We'll be able to get closer to the latter by being more clever with harnesses, I reckon, but the frontier labs will run ahead because for any given harness trick they can lean harder on model smarts.
True, but my point is that if/when local models get to the point where they are capable of doing the "delivery team" work what's next? What can these bigger SOTA models offer? And especially what can they offer above and beyond what you might be able to get from much cheaper models which the open models are based on?
These local models can do some of the work the non-frontier models can do but for me, that's not worth much. If I am just using Sonnet 4.6, I can pretty much work all day on the $20/month plan. And Sonnet is still a way more powerful model than a one you could self host on an M2 mac.
If things change to token usage billing for everyone, maybe I'll be singing a different tune but on a subscription, I don't think it makes sense financially.
What I don't understand is that on one hand we read 'what they charge is much less than it costs them' and on the other hand this thread seems to suggest that 'what they charge is more than it would cost me'.
What it costs is tricky to measure. A large part of the costs are training the model. Once they have the model they are making a ton of profit from what they charge (or so we think - I haven't seen the numbers). However the sunk costs of getting the model need to be paid for and that means an accounting problem where we have to guess how much the model will be used in the future.
Accountants are reasonably good at figuring this out - there are a lot of different things that need a large upfront investment before you can charge anything. People still debate if they are correct in this each case.
Bigger models that Antrophic want to sell cost disproportionately more (e.g. 100% more cost for 5% performance improvement) than small models you would use locally
Data Center providers are buying hardware, not anthropic. Certainly related but alot of the hardware purchased is just sitting in a warehouse waiting for a data center to get built.
Someone was able to run gemma-4-26B-A4B on an i5-8500 with 32 gb ram with NO GPU. Granted this is an extreme example these MoE models are value for money for a lot of use cases.
Show us the resulting code of using them! :) I want to use local models, I have the hardware for it, but while trying them out as replacements for GPT 5.5 xhigh or Opus or other SOTA models, they aren't quite ready to be replaced yet, sadly. The quality and bumps they encounter just slows down the workflow so much, even screwing up tool call syntax sometimes.
But, for smaller more well-defined workflows, or as straight "edit this part to be like this exact" edits, they seem more than enough. Still waiting for them to become mature enough to be able to replace what we have as SOTA today, I'd say it's ready to be switched over then.
Speaking of local models, DiffusionGemma (and diffusion models in general) should not be slept on for local usage! Usually the problem locally is that the LLMs aren't efficiently making use of your hardware, unless you start batching requests and run many at the same time, but that require different approaches in general. Instead, diffusion models work much faster for individual prompts, and not by a small margin either.
Today I finally finished porting diffusiongemma-26B-A4B-it support from Transformers into Candle, and together with some optimizations I now have it basically flying with ~450 tok/s (~19 it/s) in Candle during inference, instead of ~180 tok/s (~11 it/s) from HF's Transformers library. Even using vLLM with similar sized LLMs, I don't think I've ever gotten past the ~250 tok/s threshold for single prompts, exciting stuff for local models :)
As mentioned, I've just finished the implementation and started playing around with it, seems to be doing similarly well inside of my own agent harness as similarly sized "traditional" LLMs. Of course, neither come close to SOTA models, but I suppose if we can figure out the scaling issues you mention, we'd get a bit closer. The performance just feels like it's too good to quickly ditch diffusion. Do you have more info what those "can't be trained beyond low/mid size" issues are in practice today?
The issues around training diffusion models are well known among researchers. They're likely to not be feasibly scalable far beyond the 26B size of DiffusionGemma itself, and their lower quality compared to an equally-sized auto-regressive model (the usual one-token-at-a-time flow) is also a matter of broad consensus.
> They're likely to not be feasibly scalable far beyond the 26B size of DiffusionGemma itself
I think people used to say the same about the 8B text-diffusion models too when they came out, like LLaDA. LLaDA2.0 seemingly claims 100B total / 6.1B active MoE diffusion (DiffusionGemma is also MoE). Not saying you're wrong about the current consensus, but it has a way of changing over time, might be a bit early to claim it's infeasible to scale them, especially considering the final artifact being much more suitable for local usage.
I love running two models locally: qwen3.6 27B 8bit (dense) and qwen3.6 35B 4bit (MoE).
The 27B is the smarter, more reliable one - but it is slower.
The 35B is faster, still very smart but below 27B, a bit less reliable. The reason is the MoE - Mixture of Experts architecture, which only activates a subset of parameters, making the model much much faster.
I run the 27B on a MacBook Pro M5 Max + 40 GPU cores + 128GB RAM (well, on this beast I can have 27B + 35B in memory at the same time with headroom for all the other stuff). But because this is a laptop, it is not possible to run local LLMs all the time - it just gets too hot and too loud.
What excites me more: I run the 35B model on a MacMini M4 with 64GB RAM. It is fast, it gets a lot of work done (e.g. it scans, extracts and classifies my emails, it watches the mailbox all the time and does work). I also use it as my private Hermes assistant ("when is the next Starship launch?", "who is playing today at the World Cup? Give me some trivia").
Next step I am planning is a RTX Pro 6000 Blackwell workstation I can put in my basement. I want to run qwen really fast, with multiple threads / prompts / agents at once. And MAYBE if the budget allows, a 2x RTX Pro 6000 setup in order to run DeepSeek v4 flash on it (to run research on it).
10 years worth of Claude Max today. Also - Anthropic recently removed a model I relied on and isn't giving it back. As a non-US citizen, I would rather pay in advance but be sure, I will keep having access to inference on my own terms.
Yes, Brave search is one of these services I highly recommend paying for, the search they provide (similar to Exa, Tavily) is what makes an "OK LLM" become super smart.
Hermes is just an agent that can be setup for whatever you want (coding or more commonly personal assistant ala clawdbot). You can set it up with any of the standard tools and MCPs like brave or tavily for search.
Just wanna say it's always fun and nostalgic to see authors pass by here who I was reading back when I started my career. I was reading Vicki's blogs way back, even remember learning some email parsing in python from her over 10 years ago. TY!
I think this is overselling their capabilities. I've used Gemma 4 and Qwen 3.6 quite a bit on my strix halo home server. They're great models and the dense variants are significantly better, but they're still very far behind the frontier. If you boot up Gemma 4 MoE and OpenCode/Pi and expect to perform anything like Claude Code or Codex you're going to be very disappointed.
It's more than good. As of today, it's great. Those models listed in the blog are horrible compared to what you can run today, There's absolutely no reason to run those, you have Qwen3.6, Gemma4, and plenty other sized comparable models.
If you're resourceful, you can even run SOTA models. KimiK2.7, MiMo-V2.5/V2.5-Pro, MiniMax2.5/2.7/3, DeepSeekV3.1/v3.2/V4-Flash/V4Pro, GLM5.1, Step3.7-Flash, Qwen3.5-397B, Qwen3.5-122B, gpt-oss-120B
You can use a frontier model to create a plan that's specific enough for a local model of a very small size to execute on. The more specific you are and compartmentalize tasks the "dumber" the local model can be.
Edit:
Obviously you'll be using more tokens but this is the trade off for running a smaller model and running locally. Similar to time memory trade off but in token economics. Sorry I need more coffee
They are ok for simple stuff, coding is weak, chat is alright, writing is ok. But I had many of them write stories for ideas and they kept using the same names regardless of what the story was about. I can’t complain, it’s free. Can’t wait till they get even better, but for local image generation they are good, slow but just create a bunch in the background while you do other things otherwise it’s like 14.4k modems
I have used local models (around 128 gb) and the big proprietary models, and while I do want local models to win, it's important we keep the expectations of local models realistic. There are many blog posts about how local models today can fully replace some of the proprietary models and in some cases its true for the much smaller proprietary models, its very clearly much more behind the larger models.
You can be far more ambiguous with your tasks with the larger proprietary models as opposed to the local models. You can achieve the similar results with local models but you need to be much more detailed in your prompt.
One of the biggest things about running these local models is that the harness matters almost just as much as the model too. Codex is optimized for GPT models, CC is optimized for Claude, Cursor has a great harness that works very well across these providers. It took me a couple of iterations of the different harnesses to find one that would work well with the smaller Qwen models to do local coding.
All these conversations seem like they are missing talking about planning vs execution. I want the best possible frontier model to plan out my changes. I also have a 2nd agent that is a frontier model check the plan. Then at that point the implementation can be done by a lesser and possibly local model. The frontier model can still do a final code review on the implementation of the changes.
Claude code supports this by setting the model to "opusplan"- it will automatically use Opus for planning and sonnet for implementation. This was completely necessary with the fable release. I was able to do this with fable and it was necessary to avoid getting quickly rate limited. In settings.json:
I support local models and enjoy playing around with them, but even for personally development it is just more viable for me to pay $200 a month to Anthropic for the latest models.
It seems to me with the cost of hardware needed to run local models that, for now, it is pure hobbyist and exploratory (which is fun in its own right)
"Good" refers to the speed and not the quality. There's so much hype about Macs being great for LLMs, but nobody seems to be seriously using them for that because the open models are unfortunately so far behind.
My 2c: I think the "cloud vs local" debate is (maybe) a false dichotomy. In my experience, I use a hybrid approach and I've seen a huge productivity boost from it.
The cloud-based models are fine for big and complex tasks, but the pricing is ridiculous for small stuff—like summarizing a discussion or fixing a small bug. And cloud and privacy have never been a good match.
As an example, this comment itself was written with the help of Qwen3.5-4B running locally with an extension on top of llama.cpp default web UI [1]. The extension injects my browser's context directly into the conversation, which allows me to summarize things and draft up comments quickly. Speed is pretty acceptable for the size: ~5s TTFT and ~100 t/s generation, all running on a Macbook M5.
And when I want to run bigger tasks, I don't just stick to one provider. Apart from well-known closed-weight providers like OpenAI or Anthropic, I also experiment with open-weight models like GLM-5.1, DeepSeek V4, and Qwen3.6-27B, which provide quite good results for the price.
I'd argue both have value, and I don't see why anyone needs to choose one exclusively. Anyone else doing this?
The dsv4 flash is 158B params in total. It is possible to run locally but will require all my system RAM.
Also, a lot of my day-to-day tasks perform the same on both small and bigger models: summarize a web page, draft a response, translations, quick web search, etc.
I'm assuming privacy is not a concern since you mentioned using Deepseek already. The cost of V4 Flash for small tasks is so minuscule as to be almost free, and you don't have to deal with a churning laptop (or even buying a high-end laptop, for someone who doesn't already have one).
I guess what I'm really asking is, what's the advantage of using these small local models if privacy isn't a concern?
I do use both DSv4 the "normal" and the flash variant, non-locally. It works well, not exceptionally. And while it's cheap, I'd say that the difference between $1 per month vs $5 per month is not a big concern to me. IMO pricing is pretty competitive among open-weight models: https://huggingface.co/inference/models
Depending on use cases, but for me I found 2 use cases where a local model is a must and not optional:
- Running offline without internet access: for example, I have this project that allow transcribe and summarize audio in real time. I already used it in some events where wifi is not available: https://github.com/ngxson/llama.cpp-realtime-audio-recap
- Handle private personal data, for example health records. This is the same category of "privacy" that you mentioned, but I just want to bring up the fact that people value their privacy differently.
I run local models and they work fine for me, but specifically for use in coding harnesses, I'm having a hard time. Tools tend to end up in the same loop, trying to `ls` the same folder or `grep` the same file, over and over and eating up the whole context. Super hard to get it to do anything but that. Any tips?
Sure, but it's also not really out of scale with the cost of a shop tool in other trades.
If you're a professional that's confident in a positive return on the investment (optimal or not), or just a hobbyist with the luxury budget for a "shop" that cost is well within norms.
That's not everybody, of course, but it's not some inconceivable fantasy. A lot of people in the tech community here on HN, specifically, end up with pretty high discretionary budgets that they pour into stuff like this.
A Strix Halo with similar RAM is considerably cheaper. Still not cheap, mind, but performance is OK (not great) and it will run more or less the same models.
At least for me, it's been pretty great, but I bought my system when it was $1800, now looks like the same system is $2700 and out of stock. I still haven't quite been able to run 120B parameter models under Windows, but for Qwen Coder 30B, it works pretty darn well for my at home needs.
Yeah, they have gone up a lot since I bought mine too. I did get Qwen3.5-122b running on all-GPU (on a 128GB machine) under a minimal Arch Linux setup (I do my GUI work on a much cheaper box). It worked, but Qwen3.6-35b is performing almost as well and a lot faster.
Still cheaper than a new Mac. Maybe not cheaper than a used one.
I've certainly thought about just moving the box to Linux, but it took far to long personally to get everything running under AMD and it works 'well enough' that I don't want to make the switch. I tried playing with GAIA on it, felt a bit limited, and now have Hermes up and running, and that seems to work quite well. All the tools are changing so quickly, it's sometimes difficult to settle in on 'what's best', so I certainly can understand folks that just want to pay for a AI subscription and be done with it.
Top 10% of global earners (~800M people) can afford a $2,000 device without major financial strain.
Top 25% (~2B people) could afford it with some budget adjustments.
Bottom 50% (~4B people) would find it prohibitively expensive.
So for a SV top income, maybe that might look more like the weekly pet brushing budget, but for most people out there this is not that much of a no-brainer.
The maths changes if you're working for yourself. Because I live in Europe, I've ended up working as a contractor due to the lack of a legal entity in my country. While that mostly sucked for a bunch of reasons, I was able to get a 64Gb Mac M2 a few years back with approximately a 52% discount, which was kinda nice.
If you're working for yourself paying monthly is exactly the same as amortising an asset. Personally I'd rather my business just pay $100 a month than have to deal with additional hardware and software maintenance while using a depreciating asset that is break-even after 3-5 years depending on the spec.
No need. You can run the Gemma 4 and Qwen3.5 MoE models with as little as 12 GB of VRAM at 30-40 tps (Q4/Q5), and they both blow GPT-4o and DeepSeek R1 out of the water.
Yeah, I never had a computer that cost north of $800 until recently. While that is far from the typical HN user's budget, my bet is that it is much closer to average.
Besides those with effectively unlimited budgets for their personal compute, local models are still a long ways off.
Though, that shouldn't be conflated with the value of open-source models, which can be used by cloud providers to significantly reduce cost of intelligence.
> Yeah, I never had a computer that cost north of $800 until recently. While that is far from the typical HN user's budget, my bet is that it is much closer to average.
There are segments, everything from "Average person in world" to "Average creative professional using computers for work" and more on HN, with a wide range of costs for the hardware. HN probably skews towards the latter rather than the former, probably sitting with enterprise hardware next to them basically for fun, hard to make wider conclusions from what people here have or not.
If we define "typical" as the median HN budget, it's probably about the same as yours. Maybe the answer would have been different 10 or 20 years ago, but the era of truly needing a big budget PC has been over for a while.
It's just for gaming and AI now. Maybe not even gaming as much anymore.
Consider the perspective of someone who has a practically unlimited budget for PCs, doesn't game much anymore, and doesn't need AI to do their job. It's just part of getting older, and there are plenty of people in their late 30s and older on here.
Ah ok, not something regular joe and jane happen to have lying around at home.
Additionally the whole configuration is still very much low level, bunch of CLI commands, and if the model doesn't fit for the task at hand, it starts allucinating, generating gibberish, whatever.
Because I've seen too many people spending a lot of money on expensive hardware, without really using it in the end:
Most of those models are also available via Openrouter and many other platforms. Dirt cheap, and much faster than on consumer GPUs. Perfect to try and compare the different options.
Local models are one of the main drivers for our installer / Desktop app for OpenClaw https://holaclaw.ai (disclaimer I am one of the founders). The smaller models are really only suitable for the most basic tasks, but if you have 32gb-64gb you can get real work done (ie complex web workflows) without third party hosted models
I’m keen to understand speed here etc etc. if I bought a Mac studio with 96GB - what can I realistically run, how’s it compare to fable/opus etc and how fast is it?
Currently maxing out two Claude code accounts every x hours when working on large code migrations or setting up new iOS apps etc - most of time it’s fine but occasionally it’s mega frustrating!
I strongly recommend trying LM Studio - it's the lowest friction way to try out models, you can browse https://lmstudio.ai/models and click "Get" and then "Run in LM Studio" to download and run a model.
With 96GB I'd start with the Gemma 4 and Qwen 3.6 models. Any of those should work fine.
I think currently you can only get the M3 Ultra Studio with 96gb, and for coding tasks, say you rub Qwen Coder on it (which doesn't need that much ram), it's not the fastest, something like 30-40 tok/sec. Probably better with a MacBook Pro with the M5 chip. There is a website for comparing different configurations and models: https://llmcheck.net/benchmarks
And if you want to dial in a setting in between: I've switched to Kimi K2.6 (now K2.7) and DeepSeek through OpenRouter and Reasonix for pretty much everything, with no discernible loss of analytical quality or utility.
However, like many commenters, I don't really believe in vibe-coding, long-horizon agentic one-shot agentic coding, etc. and do not use LLMs for huge generation tasks that involve designing things end-to-end.
I also have an MBP with 128 GB of unified memory and do quite a bit of Qwen3.6-35B-A3B. No, it's not as smart as the aforementioned models, to say nothing of frontier, but many people seem pleasantly shocked by the number of banal tasks that do not require these.
If vibe-coding is hopping into a self-driving car and telling it to take you anywhere you can get a coffee, then I use coding agents more like a bicycle - they let me get further faster than if I'd walked, but I still have to decide where to go and how to get there, and I still have to pedal.
I don't vibe-code, but I do decide what to implement and what patterns to use (perhaps asking the model to analyze and give advice on this first), then I have it handle the nitty-gritty of the implementation itself. For this usage style, the latest local models are as good as having Claude at home.
I won't say it's been _easy_ (I ended up implementing my own harness to accommodate the idiosyncrasies of local models), but I will say that for the effort, having a coding agent that's essentially free to query as much as I want has been life-changing as a dev, especially when it comes to working on side projects. Knowing that my agent will never get worse in quality, suddenly cost more than it does now, or be suddenly made unavailable by external factors, was absolutely worth the trouble. And on top of all that, I can't believe it's as good as it is.
Good depends a lot.
If you are in the token maxxing hype you will probably find these models very bad comparing to SOTA, unfortunately.
The good news might be: opensource models are now good (enough) for day2day usage. But is it really? I feel that companies will always naturally strive for the best and use the SOTA (as long it is not too expensive).
I see OSS models being a good backbone for companies in the future that have validated workflows and could use those for privacy or to spare costs.
I've been running Qwen3.6-35B-A3B (and 3.5 previously) locally and it's a great model for many small tasks, probably a significant chunk of what most normal people are using LLMs for right now.
But for coding in a harness? In my experience it's unusable even for small projects. It just gets hard stuck at every little problem, wasting hundreds of thousands of tokens trying to make a convoluted solution work instead of doing the obvious thing. Or it will spend hours trying to reason through a fairly simple code flow, incrementally adding debug print statements, only to get confused by the output and then editing completely unrelated code that it convinced itself is the problem.
I've tried instead giving Sonnet the problem description and code and have it come up with a detailed plan that Qwen should implement, but doing that actually consumes a significant amount of tokens compared to just telling it to implement everything, and the results are honestly not that much better. There are just too often subtle issues with the plan that Qwen doesn't recognize when implementing, but make the resulting solution it comes up with unusable.
I love that local LLMs are being discussed more often on HN recently. But for the post, I find it strange that the author claimed they were working with local models from day 1, but wrote a post that still links to Qwen2.5 and Qwen3 in mid June 2026.
the qwopus 27b model is good for grunt work style tasks, even across multiple files. Piping a bunch of things through, small factoring changes, stuff that just takes time to type out.
I wouldn't rely on it for large stuff like codex though. I haven't tried out deepseek/kimi, if we could run those locally it would be great.
Looking at some benchmarks, the latest ~30B Gemma/Qwen score similar as Claude or GPT versions that were released just one year earlier. That's crazy progress. I can't imagine how it will be in a few years.
There are good use cases for them for sure, the Gemma 4 Good hackathon a while ago showed how local models can solve problems in health and education in areas with low connectivity or small infrastructure.
I think gemma-4-26b-a4b and Qwen3.6-35B-A3B show that there's something very interesting about a local model that does mixture-of-experts (which helps a lot with performance) and has in the order of 30 billion parameters.
These models are very capable, and use around 20-30GB of RAM while they are running.
Provided you have 64GB of RAM that leaves space for running other applications at the same time.
I tried some smaller Gemma4 and Qwen3.6 quants on my MBA with M5/16GB and had like 20-60 tokens per second. At 60 it felt pretty okay and that hardware is on the lower end.
I'd assume a Mac with 32-64GB memory would get some reasonable results.
> “if we are constrained by performance and price, what architectural tradeoffs do we need to make?” a question that so far has not really been asked in the mad token gold rush.
To be fair, I think the labs are also interested in this (e.g OpenAI parameter golf). But the incentives are tricky. When the subsidies and tokenmaxxing era ends, local models will be essential.
The problem here is always the cost-benefit. For $200/mo, you're receiving subsidized best of breed access. There's no model competing for that price anywhere. If a 27B param model is what you choose, show me your hardware! I would love to be wrong...
But for how long? The subsidized phase is probably short, and then what? I run Qwen 3.5 27 Dense om my old AMD RX7900XTX at about 45 t/s and barely use my Claude Code subscription anymore.
I have been using qwen and glm based models from last 2 years, ended up buying mutiple machines for the same. Overall i feel 24vram is a must have to get get performance (speed wise) to match hosted soln. I have 2 machines a 12gb vram one and a 24gb one. On 12gb vram i get around 50tps generation and 500tps prompt processing and on 24gb one i get 180tps generation and 3500tps prompt processing. I have different configs for different scenarios and I also use llama cpp manager manage all my configs (https://github.com/anubhavgupta/llama-cpp-manager)
> I have no concrete scientific evidence of this - my own personal vibe metric of “is a model good enough” is, “do I have to double-check it against an API model”, and GPT-OSS was the first one where I started doing that a lot less often.
The good old butt dyno!
I’ve been eyeing local models more and more with Anthropic squeezing more and more on the subscriptions. A few comments on HN had me waiting until they improved more but this article makes me wonder if I should reconsider that.
I’ve been doing some pretty niche development using a game and a script extender for said game. If these models can handle that, I’d feel good about switching.
I am happy to pay OpenAI for a cheaper model a few generations behind. But they deprecate models aggressively. They push you to bigger and smarter models, when 95% of my work doesn’t need it.
I’d love it if model providers just let old models run and let us pay less, but the deprecation makes me want to look into local models.
I currently have a desktop with a 4060 ti (16gb of vram). Most models I have tested that fit within that are not good enough for anything other then type completion (in regards to coding tasks)
I have been considering getting the 58gb Mac Mini but that is a decent amount of money to spend without confirmation on a) how fast is it and b) will it work for well-defined tasks.
The challenge I have is getting a large enough context window so tool calls work reliably, the local models easily slip into hallucinated JSON tool responses and won't trigger the tools as a result.
Same here. I'm curious what others loving Qwen are doing differently, because it constantly hits this issue for me. It's been great for autofilling blocks, but difficult for me to use agentically.
Is there a local harness designed around the local model use case that is claude code like? Opencode has been problematic at times, pi works for one off for me but not back and forth conversations with the LLM. Considering I only use Qwen or Gemma models I'm close to just writing my own at this point
I wonder how much local models hallucinate. I am getting almost daily an "Honest answers: I made that up." reply from Claude Opus when I challenge some silly thing it's trying to do.
If you wanted to do some research or learn about post training and agent harnesses, is that a good option with these local models? What hardware is recommended, or easiest to go with a Mac Studio with 64GB+ RAM?
The problem with QWEN is that it just can't edit files reliably, I had to hack Pi all over to reduce the pain, but still far from perfect...does Gemma 4 strugle on this?
I've just made a milestone on my project, moving away from AWS (budget) to self-hosted and the local models are so much faster than in the past. Beyond LLMs, having embeddings, image, video, audio gen available is crazy.
Running locally is the bar; it's hard to make these things a service which scales.
With Apple silicon and now the RTX Spark there are real discussions whether local AI is the future. The only problem is Western open source models are so far behind. I genuinely feel there's a push to fix this. Gemma is getting more frequent releases and Nvdia is quietly creating very cool small models. I hope both the hardware and models catch up and local really does emerge.
Tangential but reading on mobile, the font size in the code snippets are all over the place. I actually have the same issue on my blog. Anyone knows why?
The author has no idea what a privilege it is to have a machine like that for personal use, and how 99% of the population are not going to afford a setup like that.
Just some back-of-the-envelope maths will tell you that a $20/month Claude subscription makes much more sense financially.
I run the exact same model, on the exact same hardware - amazing results. Pair it with good search skills (Tavily, Brave, Exa) and you have a near-SOTA model on your desk.
The big caveat here is that these local models require you to invest some time tweaking your harness, AGENTS.md, and skills in order to get things roughly to the level you'd expect. But something like Qwen3.6-27B with web search capabilities and a good set of skills really is impressive! Especially considering that you can go wild and not worry about token costs.
The other thing that people tend to gloss over is that you really do need to spend some $$$ on decent hardware. Yeah, you CAN run some 4-bit quant with heavily quantized cache on your 16GB card, but it's not going to be a great experience (I think this is where a lot of the "if you think it's gonna be any good, you're going to be disappointed" stuff comes from). Yes it's a lot of $$$ upfront but it's very much unknown when hardware prices are going to come back to reality. There's a lot of hopes and dreams that any minute now an H100 will be worth pennies because "that's how it's always been" w.r.t. computer hardware, but we are living in interesting times. So you can't just make the tired old assumptions that a Claude subscription over three years time will work out to be dramatically less than the value of some card three years from now. We STILL have basically anything with >=24GB VRAM appreciating in value, which is absolutely wild. What I'm saying is, the depreciation curve may very well be a lot less dramatic and fast than it used to be, going forward.
Good? My Macbook m3 with 36gb locked up after it filled all memory with Gemma4. A bit useful yes. But it eats all resources. For local models to be useful we need at least 128gb of system memory and 512gb of video memory. Plus 8 times the compute of a single 5090/h200
I've been trying local models for the boring stuff you might be thinking about: writing small docs.
So i've tested a couple, and the speed is finally impressive. My colleague uses paid tiers of claude and GPT, and the speed is comparable. Maybe even slightly faster on my end.
The problem is: i'm running the model on my work laptop, a 12th gen i5 with 16GB of RAM (which, you know, i asked to upgrade to 64, but that was right at the time of the great RAM shortage of the '20s) so i'm pretty limited in what i can use. And this is running alongside the usual suspects: Web browser hugging 1.5GB, MPLABX hugging 3, windows taking at least 5 just to sit idle, thermal throttled to 1GHz ... And yet its speed is comparable to a paid service. A lunch's worth of tokens vs a few cents of power.
So, what i found, what i fount...
What i found is that i need AT LEAST 16k of context window, otherwise they will halt when i pass a small C file for analysis. And coding models will shit the bed with 4k. But we all know that, context size is King.
I found out that Qwen will keep looping while thinking, but that's not a surprise to you, either. But give it enough time and you will get an useful answer. I was hoping to using it as a better warning system for some languages, but i fear i need muuuch more context size, because i tried to feed a file that had a function with an endless loop:
At 4k context it almost shit the bed if i gave it just the offending function, then told it where to look at.
At 16k context, with the whole file, it needed some guidance to what the problem was, and after 10-15 minutes of thinking it found the issue. Problem is, it kept second guessing itself for another 20 minutes on the same unrelated thing before giving the output. For which the fix was wrong, but the semanthic was correct. Good enough. Maybe it will be faster if i don't ask for a fix (which i didn't i just asked to look for a specific issue)
Wish i had 3 times the RAM so i can see what happens with more context.
Then i gave it the task to analyze a C file to make an API document. It took half an hour, but then i had a good starting point, which i had to keep changing because it would confuse commands with IDs and things like that.
This was the Qwen 3.5 9B model.
I then tested Gemma 4, being impressed at the tokens per second it gives on my Pixel 8A. Same tasks: same issues with short context, with long context it gave absolutely useless answers when looking at code, but it took 1/3 the time of qwen.
In producing documentation, instead, it was much faster, and it never hallucinated data. Good. in 15 minutes i had everything done.
Not bad for stuff running on a business laptop, while doing actual work.
Tomorrow i will try Qwen 3.6, let's see how it goes..
I don't know about good, I use a lot of local models and they're still pretty painful to run locally
You have dense models (qwen 27b, gemma 31b) who are pretty smart, but pretty slow
You have MoE models (gemma 26b, qwen 35b, north mini code 30b) who are pretty fast, but make a lot of mistakes
You need a lot of memory to run these well, quantization makes tool calling weaker, so most run at 4 bit quants and are wondering why it kinda sucks and that's because you've essentially lobotomized the model (I recommend unsloth quants, i recommend 6bit for MoEs and 5bit for dense)
So you need a lot of compute to make the pre-fill fast, you need bandwidth to make the decode fast, you need a lot of memory to hold everything - lot of ifs
On top of that, your laptop becomes a loud hot churning machine, it's uncomfortable to work with.
So are they good? not really. Do they work? yes
edit: just wanna clarify - i think open models are the future, i think they're super important, i'm contributing constantly to the ecosystem - i think people should play around with these models, i think people should use `pi` and learn how it all works - but don't download a model expecting it to be good out of the box, you will have to tune and configure a lot of stuff to replace a "coding agent" that most people are using models for
This is basically my experience as well. I have a moderately recent but high spec desktop (Radeon 6900 XT with 16 GB VRAM, Ryzen 9 7900X 12-core, 64 GB system RAM), and I tried out some recommended models with ollama a month or two ago. Anything not geared specifically towards coding seemed to struggled with actually making tool calls instead of just stating the actions they would take without making them (and trying to get help from them to explain what I needed to configure to change that behavior was useless; qwen refused to believe that it was running in ollama and insisted that it was running from the Alibaba cloud without access to my local system), and the models intended for coding were barely thinking faster than I could type (if they had any ability to show thinking at all).
The best "free" experience I've found is using OpenCode with Big Pickle. It's not especially smart, so it often won't produce the correct result the first time, but the free tier is generous enough that I don't think I've hit the limit more than twice over around a month with frequent multi-hour sessions. If running locally is truly the goal, it's not going to fit the bill, but if the goal is just "get the best experience without having to pay for a sub or tokens", it's the least bad option I've found so far.
For what it is worth, I’m on a similar machine. (9070XT,5900X) and found a lot of performance improvement over ollama by compiling llama.cpp and running with —no-mmap and —perf. The context is still quite small though. With online models I use contexts of at least 200k which is useful for longer running/more complicated commands.
Locally I haven’t gone much further than 8k. That is sufficient for small changes on small code bases. And you need condensed tool output.
I haven’t tried any tool that compresses the tokens yet.
Try llama.cpp it seems to be a lot more performant and a lot more hackable. Also I'm surprised how substantial the impact of some of the inference configs (beyond just temp) can have, though this is much more model specific.
> The best "free" experience I've found is using OpenCode with Big Pickle.
I have absolutely zero interest in free. I honestly don't think I'm even remotely in the same demographic as people using free tiers / models.
I want to pay. I don't want my data used for training. I want it to be open. I want it to be consistently up (more than Claude!). I want it to be fast. I don't want it to be subsidized as that's just an excuse for shitty quality. Deepseek flash knocks it out of the park on all of these except you're data is used in training. I'm fine with it being hosted since there's no way I'm using it 24/7, but data MUST be private.
Basically I want Hetzner and OVH to run open model clouds. I'm convinced this is going to happen eventually when everyone realizes this is a commodity.
You can pay, and also use deepseek-v4-flash. OpenRouter even lets you "block" or limit your usage to providers that don't train on data. Since the weights are open, other companies are already serving the model on non-DeepSeek owned hardware: https://openrouter.ai/deepseek/deepseek-v4-flash
Good to know. I hadn't checks since early is DS4's launch when they were the only provide (I think maybe there was one other, but they also trained on your data). I see several private options now.
Hard to guarantee it's private if you don't keep it local... I don't have a lot of trust for companies in this space.
Yes, but I think that'll change eventually. If you trust hosting your code with a specific cloud provider then you'll probably also trust them for code assist. At least that's my theory.
There'll probably need to be a threat of massive litigation should they fail to comply with such a policy.
You can specify which providers you want to serve your model in OpenRouter. Then you can chose US-based ones.
These competent open models you want to use were trained on data from people like you and me.
I wonder if there are competent models trained purely on permissive open-source code like MIT or Apache 2.0.
[delayed]
I found that, with the heavily quantized Qwen3 models I can cram onto my 3060 Ti, telling the model to use its tools in the system prompt made it a lot more likely to actually do it. YMMV of course, but give it a shot.
IMO running local models "well" still requires an expensive hardware investment. You really want 96GB of VRAM on a modern Blackwell arch to run these models with decent KV cache. Trying to run them on a unified memory Mac, an AI Max AMD processor, or a DGX Spark-alike is really just asking for trouble. Prefill kills perf.
If you throw the right GPUs at the problem, they become much better - but still not quite in the realm of Sonnet or DeepSeek 4 Flash, let alone Opus / DeepSeek Pro or Mythos/Fable/GPT-5.5.
Given enough budget, power, and cooling, you can run some pretty good data pipelines, but for code, I think it still makes sense to shell out to an API provider most of the time.
Depends what you need the model to do. The recent granite4.1:3b just takes 2GB of memory and is fast. Results are pretty good and support tool calling. Barely a squeak out of the Mac laptop.
Even faster with the MLX builds.
Then when I need more heavy lifting I fire up a larger model.
IMHO the issue isn't the models. I've had OpenClaw give the same results as Claude using open models locally. Slower but does the job. Something that can do optimal model switching is what's needed.
> Trying to run them on a unified memory Mac
> but still not quite in the realm of Sonnet or DeepSeek 4 Flash
these are not mutually exclusive anymore. DS4 has set the bar for me these days. https://github.com/antirez/ds4
FWIW I think it might be both.
Ultimately if you skip over the opportunity to play with these models on your own machine you are losing out on a lot of really interesting educational opportunities — it helps make a lot of stuff feel more concrete in a way that only tinkering can.
But then I think once I had an idea of something that I was building against Gemma 4 or Qwen 3.6 I would be looking at openrouter etc., to stabilise it for the next tier of experimentation (and to get back a kind of multi-device access without tailscale/lm link etc.).
Are they good enough to replace what people seem to want to do with Claude? Maybe not. But it's an unparalleled learning opportunity.
If I could just save up $6000 I could sell off my RTX 5090 for $4,000 and buy an RTX 6000 Blackwell Pro Workstation. I can fit models into the 32GB of vram but my context window ends up being tiny for any halfway capable model.
Not really, Qwen 27b offloads to a decent gaming GPU (RTX 4090 in my case) without needing tons of RAM.
can you give more info? llama.cpp vs vllm? config? i wanna try specifically this model
Maybe we shouldn't be running these models on laptops with their thermally constrained form factor, and we shouldn't expect quick inference on a par with a large cloud-based platform either, at least not for near-SOTA model quality. It's still worth it to avoid becoming massively reliant on centralized services.
I have a 5070 12 GB laptop GPU and can hit 72 tokens per second in the first couple thousand tokens before dropping to mid-high 50s after about 15k context.
This setup is extremely optimized down to the last flag. Changing any param above the temp flag craters performance.
I don't have enough system RAM to properly handle the large context windows so I don't use local models.
That’s useless without describing WHY you chose those flags, and how you did the optimisation…
I get over 100 tok/s sustained on my M4 Max and M5 Max, in MacBook Pro's. LM Studio + MLX.
With Qwen3.6-35B-A3B-MTP-UD-Q4_K_XL.gguf?
Also, funny lumping the M4 "and" the M5, I find them 15% to 45% different performance, depending.
And for a good deal of work, an M3 Studio Ultra outpaces the M4 and ties the M5 on single work at a time, outpaces both doing multiple work at a time.
Can you comment on the quality and accuracy of it? People have managed to run Gemma 26b without GPU on old CPUs but I don't think quality is anywhere close to what Gemma 12b offers.
That's a quant 4 which the thread OP specifically called out as rubbish.
The Q4_K_XL bit for those not in the know.
Anyone calling Qwen3.6-35B-A3B-Q4_K_XL “rubish” has no idea what they are talking about.
I'd agree that the quality degrades a lot between Q8 and Q4, borderline unusable as they start to fail with tool calling syntax even. Personally I'd say Q8 is as low as you want to go.
q4 isn't rubbish, but it's a compromise for a good value, q6 is essentially a no-compromise quantization and it's what i recommend for MoEs in my experience for agentic workflows
He's probably calling me out for this comment https://news.ycombinator.com/item?id=48557579
I typically find myself using a context of between 150-500k with GPT models so local models are simply not enough and I stopped using them.
large contexts degrade the performance - attention doesn't work will for large windows like that and cloud models are kind of hacking it
local models do involve some context engineering to get it okay, but it's not that rough
That's way higher than their optimal ceiling (and absolutely suboptimal from a token cost point of view), why are you doing that?
You're 100% right and its even severe than that: I daily drive on xhigh. I really try to avoid it, but when reconciling APIs across two large codebases you really start pressing north of 200k. I find myself topping out at 800k sometimes and that's with careful context management. I actually had to drop to GPT 5.4 for 1M context in my subscription because GPT 5.5 tops out at 272k. Hitting 800k context is better than repeatedly hitting let's say 200k out of 272k with multiple rounds of compaction. I run Can's snapcompact and while its better than normal compaction it still lobotomizes the model more than running with a very high context window.
Gemma 4 is particularly good at pipeline/automation tasks.
It outperforms all the Qwen models (even 100B+) for rule following/automation style tasks in my experience. Its image interpretation is also very good, and out-benchmarks Opus.
Qwen seems to ignore instructions and consistently outputs incorrect formats (when token generation format is not explicitly constrained)
But yes, on the DGX Spark Gemma 31B Q4 with MTP runs around 20 tok/s and Gemma 26B A4B around 60 tok/s. Still quite slow. But on a high end Nvidia card would run significantly faster and still fit in memory.
I'd recommend for anyone getting into local models to focus on memory bandwidth over RAM. Models under 100B parameters are now sufficient and hugely useful for automation.
I agree that for coding/creation use cases, there's still not a compelling argument for local models.
But e.g. if you want to scan a list of stocks and interpret news/high pass filtering, interpreting logs, interpreting screenshots, the local models are more than sufficient already.
On a 5090, gemma4 26B runs at 350TPS with the command below [1] and gemma4 31B is around 150TPS with a similar command.
I'm really surprised how much slower a DGX spark is for the same price.
1. Here's my command.
PYTORCH_CUDA_ALLOC_CONF=expandable_segments:True \ vllm serve cyankiwi/gemma-4-26B-A4B-it-AWQ-4bit \ --dtype auto \ --gpu-memory-utilization 0.95 \ --kv-cache-dtype fp8 \ --enable-chunked-prefill \ --enable-prefix-caching \ --trust-remote-code \ --enable-auto-tool-choice \ --tool-call-parser gemma4 \ --reasoning-parser gemma4 \ --max-num-batched 16000 \ --max-model-len 64000 \ --max-num-seqs 12 --speculative-config '{"model": "./gemma-4-26B-A4B-it-assistant", "num_speculative_tokens": 4}'
Yes, I'd recommend a 5090 over the DGX Spark if your goal is general automation.
You can run multiple instances of these models in parallel on the DGX Spark which somewhat mitigates the difference if your task is parallelizable.
But I'd take the simplicity of a single thread and higher throughput personally.
Overall of course still better to wait for next gen devices if you can.
This is not my experience at all. Even the Nous Research guys have stated that "Qwen3.6-27B is the canonical local model to use Hermes Agent with" [https://old.reddit.com/r/LocalLLaMA/comments/1sz2y76/ama_wit...]. I am finding the same when used with Pi and OpenCode.
Gemma will just stop mid-tool call. It's been slower and I've had to reduce context size to run it. Qwen3.6 27b has been rock solid using club 3090's single card setup for agentic use -- https://github.com/noonghunna/club-3090/blob/master/docs/SIN...
I'm talking about automation generally, not agent loops.
E.g. prompt A to achieve X, output in format Y. Use Y to do something in prompt B.
Agentic loops will underperform deterministic control flow pipelines (with non-determinism constrained to LLM calls).
Agents are more general, which is the main advantage. But inherently a more general solution will waste context on unnecessary reasoning.
Try asking the smaller Qwen models to output a JSON in a specific format. It basically can't do it consistently with a moderately sized prompt unless you constrain the token generation via GGML or are extremely repetitive and specific about it. (Thinking disabled)
Gemma 4 will do it correctly pretty much 100% of the time. (Thinking disabled)
Applies to other rule following as well in my experience.
Qwen may be better at toolcalling and certainly probably codegen.
It seems to me Google explicitly designed Gemma for edge device automation, and didn't fine tune for agentic or coding use cases.
Yep agreed completely. I couldn't imagine torturing myself with a small model for local coding. But Gemma 4 31B is so fucking good for a variety of language modelling tasks.
In my mind it’s a question of knowing what you want to build and how to divide the project into tasks your local setup can handle.
If you don’t need the machine to respond instantly (or explain your own business model to you) everything can be local and it’s been like that for a few years now.
A median laptop is no bueno for running a reliable model(which will be qwen 27b as per my reading here and r/localllama). Powerful macs would be prevalent in certain areas of the world but in rest of the world personal machines aren't always that powerful.
Kimi 2.6 or 2.8 is what we are playing with locally. They need 512GB to 1TB to run with full capabilities so that's not exactly "desktop"
Our GPU computer server cost $110k.
I largely don't disagree with you but come to a different conclusion. I have two systems:
1) a "programming desktop" with a $500 upper mid range Ryzen (idr exact), 8GB VRAM Radeon card I bought solely for RuneScape, and 64GB ram
2) a maxed out Alienware 16 Area51, so it's a 5090 with 24GB vram and 64GB system ram. I bought it for gaming, of course.
I run qwen 3.6 35B A3B Q6 with 200k context window. I compare this to Claude pro max or whatever that I use at work.
The main difference between the machines is that the one with the RuneScape gpu does 10 TPS while the Alienware does 30-40tps. Both are fine though the 30-40tps is obviously a lot snappier.
I find with both models that:
- they do really well at "be a 30GB zip file of reddit and stackoverflow answers"
- they do really well at point fixing random bullshit errors that would otherwise waste my time (this is related to above of course)
- they do quite well at, given a pretty good specification of what you want, figuring it out, even if you've specified several steps needed
- they both cannot really be given a large ish task and left to just drive it on their own
The main difference between the two is with that last one, Claude is somewhat better and figuring SOMETHING out, but if Claude is having to figure it out, it's probably because I don't know what I want and it's very likely to not make a sane choice, and will generally produce slop given even the slightest amount of leash still.
I've also found that the boundary between "well specified small to medium thing" and "idk just do thing and figure it out" is the difference between you keeping control of the code and losing control. There's an "escape velocity" of AI use that, when you hit it, you're doomed to slop forever. (Or you have to deorbit... enjoy that).
So, are these models "worse" than Claude? Yeah. Am I looking forward to continued improvements? Yeah. But I now also have no desire to pay anthropic any amount of money, which has the nice side effect that i won't be helping them end up with so much money that they can distort our democracy.
Depends on what you mean by "local". On your Macbook, large dense models like Qwen 3.6 27B will be slow, sure. On a local workstation with a dedicated RTX card you can get > 100 tps, which is more than good enough to work with it, and faster than cloud models in many cases.
But how smart is it? All the people running local models never seem to mention that they are way dumber than cloud models.
I don't care how many tokens per second of nonsense it can generate.
Qwen 3.6 35b a3b is about as good as sonnet 4.5. It varies but it's at that level.
Quantized Gemma 4 26B is as smart or better than GPT 5 in most of my testing. Granted GPT 5 is nearly a year old at this point, but I can run Gemma 4 on a ~6 year old consumer GPU (RTX 3090) and get 140 t/s.
It is smart enough that I use for all my coding tasks, and a lot of other mundane tasks.
It is probably not smart enough for "design this whole architecture of this complex system from scratch, make no mistakes", but that is not something I want from a coding tool anyway. I want a model that I can point to a file and tell it to make some changes to the file and related files. Or that I can ask to review a PR with regards to certain aspects.
My suggestion is to simply try it and see what it feels like.
Its not going to be as good as Claude, but if you know what you're doing, it may be good enough to get your work done.
This is task dependent.
I find devstral (even though it’s weak generally) much better at writing and documentation than Opus. I’m actually now delegating all documentation to devstral and away from Claude, which makes a mess.
A highly skilled carpenter may be able to 'get work done' by banging nails in with a heavy-bottomed cocktail glass, doesn't mean it's not painful to do so when it is continuously breaking and leaving shards of glass all over the workshop for you to find every day for the rest of your life until you clean up the mess you made using the wrong tool for the job.
More like, a highly-skilled carpenter can work miracles with a $6 hammer from the hardware store, while the pros on the commercial crew are using fancy compressed-air tools.
The carpenter has to get up close and personal with the wood. He can't match the crew's throughput, but maybe that's not what he's trying to do.
I'm talking about the common use case that I think hacker news people have:
you get a macbook for work, you run the macbook
they're not going to start giving GPUs to employees to run local models
What counts as a lot of memory? What could someone do with 16 GB of RAM?
Not much, the capable models won't fit unless you go with very low quantization but that leads to a lot of loss.
You generally want to run q8 or some kind of "6bit" quantization at least.
40GB of VRAM is the entry-point in my experience, you can run qwen 3.6 35b a3b with full context or qwen 27b with about 92k of context.
Before you get fully discouraged, you don't need 1 gpu with 40GBs you can use multiple cards, with minimum impact on performance.
Not a ton. I'd say 64 GB minimal to play, 96-128 GB better.
Nah, you can run the 24b - 35b class with between 90k and 256k of context with about 40GB and they are pretty good. Especially the MOE variants fit neatly in 40GB.
Modern inference engines can stream in weights from SSD in order to save on RAM, but this makes inference very slow, especially for the trivial single-session case. (Jury is still out on whether batching multiple sessions together can mitigate this well enough, but even then that's mostly helpful for the "running lots of inferences overnight and getting fresh results first thing in the morning" case. Which is interesting (the big third-party suppliers don't really offer a way of doing this at reasonable cost) but a bit of a niche.)
Gemma e2b, Gemma e4b. It's made for smartphones basically. You can run e2b with 8GB RAM.
gemma 12B 4bit quant; try something with MTP and an AWQ quant
gemma runs pretty well
4 bit unsloth quants are good if you never ask for more than 20k context, use it as autocomplete on steroids, and never delegate serious questions to it
They are good if you were clever enough to buy a powerful enough rig before memory went up. For everyone else I say just wait. M1 Ultra 128GB and higher is sufficient to run gemma4:31b-mlx or qwen3.6:35b-mlx with subagents. It’s only slow if you don’t know how to plan your work effectively.
maybe painful if you are using it like a chatbot. you are sitting there waiting for response. vs ambient ai like automatically classifying your family pics and discarding random things like parking floor number pic.
i use it usecases like that latter and they are fine.
After having been a happy user of Qwen3.6-27B for a few weeks, due to being away from the hardware, I'm currently forced to use Claude Sonnet 4.6
It is such a downgrade. I don't understand how that's even possible. The thing has so many strongly-held opinions I did not ever ask it for, talking just way too much and generally feeling somehow dumber.
Of course, being significantly larger, it will encode more knowledge, but that doesn't help me when I hate talking to it. And all that on top of the fact that talking with it costs real money.
I wonder what it might be that makes me hate it so much. Maybe because it doesn't see itself as a tool but almost an equal? As if its opinions would have weight.
Qwen too can act like an overeager intern, but if you tell it that it is an idiot, it will drop that ego. Not so much with Claude. In my experience, anyway.
Anyway, point is: full ack on that headline.
I haven't spent a dime on cloud inference, so cannot make a direct comparison like you. But I can 100% attest to the fact that Qwen3.6-27B is a very capable local model for coding tasks. Over the last month and a half I've been using it almost daily, either on my M2 Ultra or on my RTX 5090 box. I use it for small mundane tasks at ggml-org [0] - nothing really impressive, but definitely a helpful tool for a maintainer. I think I would be using it much more, if I didn't have to spend a lot of my time on reviewing PRs. Currently, I have a very lightweight harness - the pi agent with everything stripped (`pi -nc --offline`) and a short system prompt [1] to align it a bit with my style. About the generation speed: ~100-150 t/s on the RTX 5090 and ~40 t/s on the Mac. I definitely prefer running it on the RTX machine - it's so much faster. But for the sake of testing and getting wider experience with local configurations, I often run it on the Mac too.
[0] - https://github.com/search?q=%22Assisted-by%22+user%3Aggml-or...
[1] - https://github.com/ggml-org/llama.cpp/blob/master/.pi/gg/SYS...
I also confirm that local inference is on par with proprietary cloud services (with a bit of local setup, simple agents.md and some utils skills). This local models come with tools, that's mind blowing, considering that some months ago we had to .md tools ourselves. What makes a model worth even more is "Memory". We implemented that long ago. Last time I used proprietary services was 3 months ago, don´t really need it, my subscription is going blank.
Gerganov, hope you will consider developing further the CLI cause we suffering with the server.
what are you using for memory with your local models? is there a specific harness you would recommend for local agents?
> About the generation speed: ~100-150 t/s on the RTX 5090 and ~40 t/s on the Mac
Curious if you can share the prefill speed too?
I run locally on a crappy desktop (some AMD iGPU with Vulkan llama.cpp, 32 GB DDR4 RAM) for experimentation. I get 15 tok/s on generation for the qwen & gemma4 MoE models. I get around 150 tok/s prefill speed.
Reason I'm asking about the prefill is looking at my stats at work, I use between 20M to peaks of 300M input tokens daily. Some of those token are cached but in general, I seem to have roughly 500x more input tokens than output. So interested in prefill tok/s stats.
Huge Thank you for llama.cpp btw!!
Here are the prefill speeds:
Btw, based on your numbers, I think our use cases are quite different. I use the agent for very targeted sessions - basically things that are clear to me how to do, just want to automate them. My workflow is usually: new session -> read this, this and this -> do that. I.e. I don't let it wander at all in the codebase, so I rarely exceed the context window.Also, I get a lot of mileage from the ngram-based speculative decoding functionality [0] as it allows me to iterate on the implementation much faster.
[0] https://github.com/ggml-org/llama.cpp/pull/19164
Thanks! Super helpful.
I do use it the same way as you're describing on personal projects at home, in a very crude manner (pasting code snippets in llama server web UI prompt. Next will attempt OpenCode)
At work I use it in similar manner with more mature tools, but the vast majority of token spend comes from a totally different workflow: "pretend the AI is a fleet of junior/intern engineer you're delegating work to", where the agent will on its own do the implementation, commit the changes etc.
It does indeed spend a lot of tokens wandering the codebase, talking to MCPs, loading skills etc.
What quant do you run it at? 32GB seems like cutting it close on the rtx 5090 if going 8b, but other commenters are saying 4b lobotomizes the model.
As a baseline, I run all models in Q8 [0] because I want to be confident that when I observe a problem, the root cause is not due to the quantization. However, in this specific case, I use Q8 on the mac and Q4 on the RTX machine because the latter does not fit the full context at Q8. So far, I don't have conclusive evidence that the Q4 quantization affects the quality in a significant way for this model and the tasks that I am using it for.
[0] https://huggingface.co/ggerganov/presets/blob/main/preset.in...
Not too shabby. I like the regular Qwen but prompt prefill on my m1max is slow as hell
Yep, I daily drive Qwen3.6-27B (including for work), have done pretty much since it came out. IMO it's the only (small-ish, local) model worth using, if you can run it. It might not be as good as Opus at "add X large feature" but I don't want that in a model. I want to do the thinking while it does the typing. And Qwen 3.6 27B is perfectly good at that (while in my experience models like the 35A3B and gemma are significant downgrades)
Plus, I never have to worry about rate limits, quotas, or sitting in a queue during peak time. And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
Running on 2x 3090, 500-1000tok/s prefill and 60tok/s output at Q6_K_XL with MTP on llama.cpp, 220k tokens context window (starts to get a bit dumb above 160k ish), no KV quantization
> And I can always see its full thoughts, don't have to worry about where my data is getting sent, and know it can't get secretly nerfed.
For this reason I wonder if local models are a potential business opportunity. Provide the service to engineering teams to give them a pre-built and setup GPU rig they can run in a closet. No need to worry about all the things you mentioned and clients can rest-assured their data isn't disappearing into a sketchy data center. There might be regulatory reasons that make on-prem setups appealing as well.
This is, as far as I know, the business model of coys like mistral and cohere
On-premise (1960-2010) -> Cloud (2010-2026) -> On-premise (2026+)?
I think that's overstated, but the loss of trust companies have with the big AI players is pretty serious. Not a big deal if your app is for sharing cat videos, but if you're medical or wealth management or a government contractor or the like enterprise clients really like to see good data security policies.
Agree. I also wonder how zero e.g., Claude Enterprise ZDR really is, and what their data pipeline actually looks like.
I think the next step to anyone but overbloated USA models is to follow https://chatjimmy.ai/ with one of the qwen models. If they can mass produce something at relative cost, these would be awesome sidecars.
> (starts to get a bit dumb above 160k ish)
If open models can ever hold roughly 600k token windows, I'll be really excited, I found that around 300 ~ 400k of Claude reading through your codebase results in better outputs. I also have Claude read official docs instead of "guessing" as to how to do something.
I think we'll get there. Right now it works for me, because I'm naturally pretty verbose in my prompts, and know the codebase well, so I know what it needs to look at. Plus subagents for anything exploratory.
I think deepseek v4 pro has 1m context and does pretty well up to around 600k. But if you have the hardware to run that locally, you already know
Even then if there's a smaller model with 1M context, you'll need a ton of RAM to actually run it at full 1M. I guess that's why you don't see it too much. Anyone that could run Qwen 3.6 27B with 1m context would be better off running a much bigger model with smaller context instead, in the same amount of VRAM.
In terms of optimizing further, huge context + KV quantization sounds like a terrible idea, but there's some decent innovation in sparse attention, KV cache rotation allowing Q8 to perform nearly as well as full 16-bit precision, plus some ideas around offloading KV cache to system RAM (but I'm skeptical)
DeepSeek V4 (both Flash and Pro) has very good scaling of context length wrt. RAM use, so this is not an inherent limit of LLMs in general.
With yarn and rope scaling arguments for llama.cpp you could run qwen3.6-27B with 1M context… if you have enough memory to store it.
I don't really think you're making reasonable decisions at that size; but I suppose if you're not allowed to refactor it, maybe.
I think the way these models work excludes sane behaviors the larger the context gets as each token introduces potential ambiguities between "USER" and "SYSTEM" messages leading to all the catastrophic behaviors.
Anyway, with AMD395+ I'm finding ~100k is both speed and context usefulness unless it's scoped tightly. with opencode, I manage it with dynamic context pruning: https://github.com/Opencode-DCP/opencode-dynamic-context-pru... ; then anything I touch ends up being refactored so context doesn't get bloated with unecessary functions, etc.
Obviously, this isn't compatible with certain business codebases, so I can see why bloat meets bloat.
Just this morning I tweaked my single 3090 setup too:
and that fits in 23GB.[edited for format]
are you running an NVLink? I have the same setup but no NVLink and it feels like it's best just splitting the 3090s to run separate models concurrently. But I also have no idea what I'm doing.
Do you have any resources on hardware necessary for running models and tweaks? I see you mention 2x 3090 and I wanted to do more search on what hardware is satisfactory for what models.
How long have you been using it?
> talking just way too much
OMG this is such an annoying property, just shut the hell up please, and be concise.
I suspect that this is an artifact of the thinking property, but please just summarize the thinking process far more concisely, where a single sentence answer is more than sufficient the frontier models seem devoted to going on to a minimum of 5 paragraphs and offering 3-5 new directions.
And requests to please only offer a single step at once, or single option at once, or to even stop eagerly offering future directions is really hard to prompt correctly.
And look, there I did exactly what I was complaining about...
I'm not sure to what degree you can influence how a model thinks, but you can definitely hide the thinking tokens and tell the model how you want it to talk to you.
For example, the Claude web UI has an Instructions field where I have told it never to congratulate or praise me for asking questions. Earlier Copilot models used a ridiculous number of emoji and bullet lists when answering literally every prompt, I told it to knock that off and prefer detailed paragraphs in prose.
Local agents/frameworks/whatever all have their equivalents for overall user preferences.
Thanks for the reminder! For others looking for this setting, it is currently under User Menu (click your account name in the lower left), then "Settings", then the "General" tab there's an "Instructions for Claude" box.
Asking Claude for this provides incorrect instructions for me, so I'm guessing it moves around a lot.
That's why you have to give claude and others directives/.md at the beginning so it doesn't go off the deep end with suggestions.
Yeah, I've tried, and I'm sure somebody is going to say "skill issue" but it's not so easy to get the model to do that. Maybe it should be a SKILLS.md issue.
Edit: also, how can I stop the LLM from all this fake glazing, as if every question I have is some sort of unique genius insight, it's so damn annoying. I just got the third straight round of this while merely trying to get summarization of a PDF:
> Good question — it gets right at a real tension in the paper. Let me check the current state of actual SV-imputation efforts, since this has moved since 2020.
I didn't try telling to be concise and stop pampering me yet (but good idea, tomorrow), however I found that instead of me writing agent instructions, it works much better if I tell claude to write instructions for itself. I do check if they make sense of course, but its wording works much better than mine.
Sonnet is extremely overpriced. It's a good model, but not worth the money Anthropic charges for it.
If you think about it, they're splitting the power across millions of users. Essentially, these AI companies have YOUR hardware that YOU are paying (them) for in a cabinet at some data center. This means the hardware could easily be run locally for inference for these 'big' models. It's just a problem of dynamics-- RAM is being bought in bulk by these companies through these B200 style cards, instead of sold slowly through the open public markets.
This is likely due to a combination of mass funding for the AI companies, but also they are trying to governmentally restrict which countries get access to these cards so certain countries get a head start. The only way to lock that down is to have them literally locked in their own GPU prisons (data centers). Third reason is it does make it possible to train the models faster by having them in the same data center connected directly. Having them distributed to everyone would slow down training considerably.
The current way to 'own' decent RAM and GPUs right now is through the stock market it seems.
Funny that coding agents have personalities, including "that colleague" you want to avoid even if you know they're probably quite good at what they do!
I would not generalize based on experiences with Sonnet. The flagship models (Opus being the claude equivalent) are dramatically better.
Opus in my experience is equally unpleasant "character"-wise, but at least it actually gets stuff done more often, so it's at least slightly more earned at that. It's still a neurotic cargo-culting dogmatic idiot, but one that at least sometimes does produce deliverables instead of only bottom-tier HN-esque opinions.
Hmm. I think I might just fundamentally disagree with Anthropic about the idea of what a "tool" should be.
There's a model on Huggingface where someone takes Qwen and makes it think Opus style, and that one seems to be decent, not sure if they have the 27B variant in that style. I do wonder if you can tweak your system prompt to force Qwen to behave better?
You read the OP backwards, they said Sonnet is a downgrade from Qwen, and prefer Qwen's tone
Sure, but my argument still holds, the idea is that Qwen reasons the way that Opus on High (what is now Max or whatever?) level thinking to reason about problems instead of its standard approach.
Yes, Qwopus :) I've been pleasantly surprised by its quality
Seen that one too, same guy I'm thinking of too, havent had a chance to try all of their models. For anyone curious I believe the username is Jackrong on huggingface? They've got several models out on there each focused on programming from different approaches.
Curious if you have tried custom instructions. I was never quite as unhappy with Claude's voice as you appear to be, but there were several things I didn't like. A custom prompt fixed almost all of them.
I think it would be very hard to convince someone to pay $100/mo to go back to Claude if they have a local model up and running, particularly now that model improvement has basically been stalled for the last 6 months. It’s so easy to set it up for yourself now too with things like LM studio. That said, there will always be unsophisticated users who can’t figure it out, so there will always be someone there to pay.
The person I was replying to specifically said that the Claude will "encode more knowledge" and that their problem was that they didn't like talking to Claude. It sounds like they think that Claude is at least slightly more functional. And the "not liking talking to it" is probably fixable. Someone for whom a local model works, and for whom the economics make sense, should absolutely run a local model and I wouldn't try to convince them otherwise. I'm sure it's the right choice for a lot of people. But not liking the personality of Claude is probably not a great reason on its own, given the minuscule amount of effort it takes to fix.
The third category are the occasional users that won’t have the hardware and won’t stomach a monthly fee for “unlimited” but are happy to pay-per-use.
I’d think the volume for that category would be low but LLMs aren’t just for coding.
I’m probably the third category. I like experimenting and trying different models and techniques. I want api access for my own apps and Claude subscriptions don’t have that.
Sure I could splash out a ton of money for a high ram Mac, but deepseek is so dirt cheap that I think depreciation on a high end machine costs more than my api spend.
Example of what I’m using it for: building a semantic database of podcast content (podcast discoverability sucks on an episode level). I need a cheap LLM, an embedder, a transcriber, none of which Claude will do.
My api costs for coding agents plus running apps are about ~$20/month, but I get more than just chat + Claude code.
If all I was doing was pumping an employers codebase through a coding agent, Claude would be the answer.
Not everyone has the right hardware.
I guess I’m thinking of the $100/mo users, for whom it’s probably possible to get the right hardware.
what kind of hardware do you need in order to run qwen3.6-27b
Depends on which variant you pull down, but a single 5090 GPU (I know these are insanely expensive, but for context) could run either the Q8 or Q4_K_M version. It will not fit the 52GB version (BF16) on the other hand. So any modern Mac with a Pro or better processor and more than 52GB of RAM (don't forget VRAM for context window also matters!) would suffice, as someone else noted, probably a 128GB model would do the trick, and give you enough wiggle room to max out the context window.
My Mac only has 16GB of VRAM (20GB total - 8 is reserved for the OS) so I have to leave room for VRAM, I usually find a model that fits in 5 to 7 GB of VRAM and then max the context window as much as I can.
Note you can change the amount of shared (V)RAM reserved for the OS with:
sudo sysctl iogpu.wired_limit_mb=18800
will allow you to use more, but you do need to leave a bit for the OS obviously!
I recommend MacBook M5 Max with 128 GB of RAM to run it comfortably and fast. If you have something like a regular M4, go with qwen3.6-35b-a3d - the Mixture of Expert architecture makes it run 2-3x faster than the 27b version.
I could run it on 7900 XT with 64k context. You could run it more comfortably on a 24 gb vram.
I noticed Fable was quite a bit terser, and I think it's due to changes in the system prompt [0]. They're literally saying "just give me the TLDR" and "give brief updates". You can tweak a lot of that with an AGENTS.md.
[0] https://twelvetables.blog/comparing-claude-fable-5s-system-p...
Very curious what hardware you're running this on!
The same 24GB VRAM RTX 4090 I bought to play Cyberpunk 2077 with.
Works perfectly fine in llama.cpp throwing 70+t/s at me with 128k q8 K/V context when using the IQ4_NL quant + MTP at q4 MTP K/V.
Also leaving this here because you might find it useful: https://hypfer.github.io/will-it-fit-llama-cpp/
Nice! Do you do anything with that compute when you're not actively using it? Is the crypto-mining hobby still worth it? I've also wondered if such expensive hardware can be rented back out to offset cost. Looks like these cards are going for as much as $4k nowadays.
There are services where you can hook your card up and rent it out to other users. I don't know what any of them are called, but they do exist.
Salad.com is one. (I’m unaffiliated, just happened to come across it this week while looking for a cheap option)
I've paid ~2k€ in 2023. Since I'm usually sitting next to it, I'm only using it when I want to use it. It can get quite loud and warm.
Crypto (to my knowledge at least) moved away from GPU mining. I guess you could maybe rent out GPU compute, but - being in germany - it's not worth the legal hassle. You could of course always commit tax fraud, though I wouldn't recommend that.
> I've also wondered if such expensive hardware can be rented back out to offset cost.
Massive legal liability. Not worth it.
What did you call me?
Why Sonnet 4.6 not Opus?
Well but comparing with sonnet 4.6 instead of opus 4.6,.7 or .8 doesnt make a real point I mean, pay 200 USD/month (if you have that cash, or your company has it), might not justify using local at all (unless you have some reason to suspect about data leakage)
sync/ack
The Anthropic models have always been annoying this way -- chatty/opinionated and Dunning-Krugerish. And love to run away and do things unprompted with me jamming my ESC ESC ESC key over and over so I can get a word in edgewise.
FWIW Codex/GPT models are way less this way. Maybe to a fault.
I'm setting up my DGX Spark to try Qwen 3.6 27B again, as I'm hearing a lot of good reviews. When I tried it some time ago it was still early for support in llama.cpp.
This is the kind of thing that Anthropic et al should be worried about. As it becomes easier and easier to run local models, the ceiling of what they'll be able to charge will get lower and lower. Not that nobody will be willing to pay $$$$$ per month, but a lot of people are going to multiply the per-month charge by 12 or 24 and say "Could I set up a local model for less than that, and have it pay for itself within a year or two?" And if a significant portion of customers decide to buy instead of rent, the companies whose business model is entirely centered around renting will suddenly find themselves hurting for customers.
The opposite of that has been happening for 20 years now with cloud compute.
It won't happen with AI models either.
It's almost ingrained in the American business model now. Outsource everything. Nobody wants to manage a room full of servers when they can spend 2-3x as much and outsource that headache along with the responsibility for it.
Same will happen with AI. Whether that means paying Anthropic that premium or paying AWS.
I'm in a relatively small business, we recently had an outage related to our local infrastructure.
I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Everyone wants to shuck the chore and the responsibility.
> The opposite of that has been happening for 20 years now with cloud compute. It won't happen with AI models either.
AI is different.
Cloud computing genuinely is cheaper on average. It's better than paying for cisco servers, and at scale, it's cheaper than managed platforms (ala Heroku), and it's a coin toss for when you're in the middle ground and constantly approaching the point of rebuilding poor-man versions of existing products but with very very expensive engineering salaries.
In contrast, local models offer dramatic savings, and are magnitude of orders better in certain aspects: like stability - the performance is all over the place with traditional AI companies as they divert compute to their next big thing.
The benefits to maintaining your own infrastructure are pretty moderate to low, with very high risk.
And also, alternate models are pretty easy to use and easy to swap out unlike the vendor lock-in that exists with cloud services.
There's no economic reason why running a model locally should be better than using a cloud hosted version.
Sure there is. Keeping your IP in house.
IMO local-vs-cloud may be a misleading dichotomy, versus:
There are some important differences between 3 and 4 in terms of data privacy and security.For many companies (country-dependent) that's not really why they use cloud services vs purchasing. It's tax shenanigans and business process overhead. OpEx vs CapEx, and a small (%) bump in the huge AWS bill no one will even notice or a $30k+ invoice for hardware that has to go through rigorous review and 3 departments.
Same reason people pay for things through the AWS marketplace (like Vanta) instead of having to go through their invoicing process.
It's just not comparable though is it? You need cloud services because it's physically impossible to use your single home computer as a server, CDN, load balancer, mass storage, security service, and distributed system.
But AI is just weights, you can run a reasonably intelligent model at home, or on a few GPUs if you're a small-medium sized company, and it doesn't require dedicated maintenance.
> I got pressure from the CEO saying it wasn't reliable to host our own infrastructure anymore even though our total internal down time over the last 5 years is significantly less than even a single of the larger recent AWS outages.
Same here. My job as a software dev does not require me to self-host services we need and use. Quite the opposite. But, I am reluctant to hand over all control to AWS or equivalent for several reasons that I will get into here.
I have found that Infrastructure as Code (IaC) and modern tools like opentofu, ansible, combined with frontier AI models and harnesses gives you superpowers in this space. Almost all of our self-hosted services are fully managed by these tools. e.g. We perform backups and test them more often now than we ever did before. Entirely because it is so much easier to do all of that now.
That's an interesting take, however there is no ongoing maintenance related to local models, maybe the only effort is giving more capable machines to the workforce; but yeah I can see how it might feel like a barrier.
The hardware, the power systems, the cooling systems. They need maintenance.
The OS needs updates, file systems get corrupted.
Fans get dirty.
All the things that you need to deal with in hosting your own server infrastructure you have to deal with when hosting your own AI infrastructure (which runs on servers...)
However, you can get many of the benefits of a "local model" by outsourcing all the hardware maintenance but still using an open model. Guaranteed repeatability for one.
A lot of the reason people outsource normal software is its brittle security properties, not sure that even applies to an LLM - it can go and look up the latest security best practices just like an engineer can.
Still though, perhaps the existence of low-margin, generic, cloud LLM's puts some downward pressure on the 'brand name' companies?
outsource that headache along with the responsibility for it
You know what gives me headaches? When I'm in the middle of a session and the model gets rug-pulled out from under me because somebody at the model provider didn't pay the Trump bill that month.
Or when someone at the model provider decides that the curve-fitting algorithm in my graphics package looks a little too much like Skynet for comfort.
Or when they do any number of other things to undermine my work for the sake of their business model, some of which I won't even notice until the damage is done.
The sad thing is, if you know how inference works, you know that it really is insanely wasteful for everybody to run it locally. If anything naturally belongs in the cloud, it's inference. But at the same time, what choice are we being given?
Anthropic isn't just renting out compute, they're renting out a closed model that's better than anything you can download for free. So they're rightfully focused on preventing others from distilling their model.
I'm curious when coding-heavy companies will start running their own on-prem AI clusters. Has anyone had the idea to sell something like 4 GPU machine an engineering team could throw in a closet somewhere and run whatever they want on it? I imagine this won't appeal to everybody but with the trust issues the hyperscalers have developed hoovering up people's data and using it to train their models, I imagine some will find value in a machine and model they have transparent control over including the option to walk over and unplug the thing.
Has anyone had the idea to sell something like 4 GPU machine an engineering team could throw in a closet somewhere and run whatever they want on it?
I think that's basically Geohot's business model at Tiny Corp.
They are working hard on you not being able to run a thing locally. OpenAI buys all RAM on the spot market, causing the rise of RAM/VRAM prices 6x, making GPUs and decent computers unreachable for the majority of the population. OK, some richer folks might be able to get a 512GB MacStudio or a single RTX Pro 6000 for 13k and be able to run some decent local models, but the vast majority will need to use API. And at some point Nvidia might say: "We don't sell that many 6000s, so let's just cancel them altogether as we can gain 4x profit on datacenter-only GPUs" and then they'll become unobtainium and no private person would ever be able to run anything decent (~1 year behind the frontier) locally.
The general consensus is that local models will continue to improve drastically, but hosted models will as well. There will _always_ be a pretty big gulf of capability between what you can do with a desk full of hardware at home vs a few racks of hardware in a datacenter. That seems to be the real "moat" of hosted models at this point in time: access to capital.
What's interesting/exciting is that local models are _already_ quite good at tasks we never imagined AI _ever_ doing before ChatGPT hit the scene just a few short years ago.
We're also in an interesting point in time where companies are releasing the fruits of their research/labor (the LLMs) to the general public for free. For now, I think they see it in their best interest to gain mindshare and rapport, as well as advancing the state of the art in smaller LLMs ("a rising tide lifts all boats") but I fear and expect that these will dry up as the major players buy the minor players, and all will seek a return on their considerable investments in AI research.
I believe there's a level of diminishing returns. Sure, SOTA will probably always benchmark better than local models. But do we need it? That's the question that the likes of OpenAI and Anthropic should be worried about.
The difference won't be in the individual tasks. It'll be in the scale of job they can take on and how you interact with the model. Think of pairing with a junior vs replacing a full delivery team, that's the sort of difference we'll be looking at. We'll be able to get closer to the latter by being more clever with harnesses, I reckon, but the frontier labs will run ahead because for any given harness trick they can lean harder on model smarts.
True, but my point is that if/when local models get to the point where they are capable of doing the "delivery team" work what's next? What can these bigger SOTA models offer? And especially what can they offer above and beyond what you might be able to get from much cheaper models which the open models are based on?
That's what I mean by diminishing returns.
These local models can do some of the work the non-frontier models can do but for me, that's not worth much. If I am just using Sonnet 4.6, I can pretty much work all day on the $20/month plan. And Sonnet is still a way more powerful model than a one you could self host on an M2 mac.
If things change to token usage billing for everyone, maybe I'll be singing a different tune but on a subscription, I don't think it makes sense financially.
Fun? Yes. Financially sound? No.
What I don't understand is that on one hand we read 'what they charge is much less than it costs them' and on the other hand this thread seems to suggest that 'what they charge is more than it would cost me'.
What it costs is tricky to measure. A large part of the costs are training the model. Once they have the model they are making a ton of profit from what they charge (or so we think - I haven't seen the numbers). However the sunk costs of getting the model need to be paid for and that means an accounting problem where we have to guess how much the model will be used in the future.
Accountants are reasonably good at figuring this out - there are a lot of different things that need a large upfront investment before you can charge anything. People still debate if they are correct in this each case.
Bigger models that Antrophic want to sell cost disproportionately more (e.g. 100% more cost for 5% performance improvement) than small models you would use locally
Maybe that is why they are buying up as much hardware as they can? If their service is the only game in town.
Data Center providers are buying hardware, not anthropic. Certainly related but alot of the hardware purchased is just sitting in a warehouse waiting for a data center to get built.
Someone was able to run gemma-4-26B-A4B on an i5-8500 with 32 gb ram with NO GPU. Granted this is an extreme example these MoE models are value for money for a lot of use cases.
https://www.reddit.com/r/LocalLLaMA/s/YontVNVRbL
Show us the resulting code of using them! :) I want to use local models, I have the hardware for it, but while trying them out as replacements for GPT 5.5 xhigh or Opus or other SOTA models, they aren't quite ready to be replaced yet, sadly. The quality and bumps they encounter just slows down the workflow so much, even screwing up tool call syntax sometimes.
But, for smaller more well-defined workflows, or as straight "edit this part to be like this exact" edits, they seem more than enough. Still waiting for them to become mature enough to be able to replace what we have as SOTA today, I'd say it's ready to be switched over then.
Speaking of local models, DiffusionGemma (and diffusion models in general) should not be slept on for local usage! Usually the problem locally is that the LLMs aren't efficiently making use of your hardware, unless you start batching requests and run many at the same time, but that require different approaches in general. Instead, diffusion models work much faster for individual prompts, and not by a small margin either.
Today I finally finished porting diffusiongemma-26B-A4B-it support from Transformers into Candle, and together with some optimizations I now have it basically flying with ~450 tok/s (~19 it/s) in Candle during inference, instead of ~180 tok/s (~11 it/s) from HF's Transformers library. Even using vLLM with similar sized LLMs, I don't think I've ever gotten past the ~250 tok/s threshold for single prompts, exciting stuff for local models :)
> Instead, diffusion models work much faster for individual prompts, and not by a small margin either.
Diffusion models can't really be trained beyond low-to-mid size and have lower quality than an equally sized, plain one-token-at-a-time model.
As mentioned, I've just finished the implementation and started playing around with it, seems to be doing similarly well inside of my own agent harness as similarly sized "traditional" LLMs. Of course, neither come close to SOTA models, but I suppose if we can figure out the scaling issues you mention, we'd get a bit closer. The performance just feels like it's too good to quickly ditch diffusion. Do you have more info what those "can't be trained beyond low/mid size" issues are in practice today?
The issues around training diffusion models are well known among researchers. They're likely to not be feasibly scalable far beyond the 26B size of DiffusionGemma itself, and their lower quality compared to an equally-sized auto-regressive model (the usual one-token-at-a-time flow) is also a matter of broad consensus.
> They're likely to not be feasibly scalable far beyond the 26B size of DiffusionGemma itself
I think people used to say the same about the 8B text-diffusion models too when they came out, like LLaDA. LLaDA2.0 seemingly claims 100B total / 6.1B active MoE diffusion (DiffusionGemma is also MoE). Not saying you're wrong about the current consensus, but it has a way of changing over time, might be a bit early to claim it's infeasible to scale them, especially considering the final artifact being much more suitable for local usage.
I love running two models locally: qwen3.6 27B 8bit (dense) and qwen3.6 35B 4bit (MoE).
The 27B is the smarter, more reliable one - but it is slower. The 35B is faster, still very smart but below 27B, a bit less reliable. The reason is the MoE - Mixture of Experts architecture, which only activates a subset of parameters, making the model much much faster.
I run the 27B on a MacBook Pro M5 Max + 40 GPU cores + 128GB RAM (well, on this beast I can have 27B + 35B in memory at the same time with headroom for all the other stuff). But because this is a laptop, it is not possible to run local LLMs all the time - it just gets too hot and too loud.
What excites me more: I run the 35B model on a MacMini M4 with 64GB RAM. It is fast, it gets a lot of work done (e.g. it scans, extracts and classifies my emails, it watches the mailbox all the time and does work). I also use it as my private Hermes assistant ("when is the next Starship launch?", "who is playing today at the World Cup? Give me some trivia").
Next step I am planning is a RTX Pro 6000 Blackwell workstation I can put in my basement. I want to run qwen really fast, with multiple threads / prompts / agents at once. And MAYBE if the budget allows, a 2x RTX Pro 6000 setup in order to run DeepSeek v4 flash on it (to run research on it).
I'd love an RTX 6000 Pro, but how can you justify it when it costs 10 years worth of Claude Max?
10 years worth of Claude Max today. Also - Anthropic recently removed a model I relied on and isn't giving it back. As a non-US citizen, I would rather pay in advance but be sure, I will keep having access to inference on my own terms.
Also, it will just be faster - and more fun too.
Did you get a Brave search API key or something for that “Hermes”?
I have my mine setup with a searxng instance I run in a docker. Works great and costs zero.
Yes, Brave search is one of these services I highly recommend paying for, the search they provide (similar to Exa, Tavily) is what makes an "OK LLM" become super smart.
Hermes is just an agent that can be setup for whatever you want (coding or more commonly personal assistant ala clawdbot). You can set it up with any of the standard tools and MCPs like brave or tavily for search.
Just wanna say it's always fun and nostalgic to see authors pass by here who I was reading back when I started my career. I was reading Vicki's blogs way back, even remember learning some email parsing in python from her over 10 years ago. TY!
I think this is overselling their capabilities. I've used Gemma 4 and Qwen 3.6 quite a bit on my strix halo home server. They're great models and the dense variants are significantly better, but they're still very far behind the frontier. If you boot up Gemma 4 MoE and OpenCode/Pi and expect to perform anything like Claude Code or Codex you're going to be very disappointed.
It's more than good. As of today, it's great. Those models listed in the blog are horrible compared to what you can run today, There's absolutely no reason to run those, you have Qwen3.6, Gemma4, and plenty other sized comparable models.
If you're resourceful, you can even run SOTA models. KimiK2.7, MiMo-V2.5/V2.5-Pro, MiniMax2.5/2.7/3, DeepSeekV3.1/v3.2/V4-Flash/V4Pro, GLM5.1, Step3.7-Flash, Qwen3.5-397B, Qwen3.5-122B, gpt-oss-120B
You can use a frontier model to create a plan that's specific enough for a local model of a very small size to execute on. The more specific you are and compartmentalize tasks the "dumber" the local model can be.
Edit: Obviously you'll be using more tokens but this is the trade off for running a smaller model and running locally. Similar to time memory trade off but in token economics. Sorry I need more coffee
Running AI on timesharing mainframes does seem like an odd final state for the world.
They are ok for simple stuff, coding is weak, chat is alright, writing is ok. But I had many of them write stories for ideas and they kept using the same names regardless of what the story was about. I can’t complain, it’s free. Can’t wait till they get even better, but for local image generation they are good, slow but just create a bunch in the background while you do other things otherwise it’s like 14.4k modems
I have used local models (around 128 gb) and the big proprietary models, and while I do want local models to win, it's important we keep the expectations of local models realistic. There are many blog posts about how local models today can fully replace some of the proprietary models and in some cases its true for the much smaller proprietary models, its very clearly much more behind the larger models.
You can be far more ambiguous with your tasks with the larger proprietary models as opposed to the local models. You can achieve the similar results with local models but you need to be much more detailed in your prompt.
One of the biggest things about running these local models is that the harness matters almost just as much as the model too. Codex is optimized for GPT models, CC is optimized for Claude, Cursor has a great harness that works very well across these providers. It took me a couple of iterations of the different harnesses to find one that would work well with the smaller Qwen models to do local coding.
So which harness did you end up choosing?
All these conversations seem like they are missing talking about planning vs execution. I want the best possible frontier model to plan out my changes. I also have a 2nd agent that is a frontier model check the plan. Then at that point the implementation can be done by a lesser and possibly local model. The frontier model can still do a final code review on the implementation of the changes.
Claude code supports this by setting the model to "opusplan"- it will automatically use Opus for planning and sonnet for implementation. This was completely necessary with the fable release. I was able to do this with fable and it was necessary to avoid getting quickly rate limited. In settings.json:
"env": { "ANTHROPIC_DEFAULT_OPUS_MODEL": "claude-fable-5" },
Obviously have that set to "claude-opus-4-8" now.
I support local models and enjoy playing around with them, but even for personally development it is just more viable for me to pay $200 a month to Anthropic for the latest models. It seems to me with the cost of hardware needed to run local models that, for now, it is pure hobbyist and exploratory (which is fun in its own right)
"Good" refers to the speed and not the quality. There's so much hype about Macs being great for LLMs, but nobody seems to be seriously using them for that because the open models are unfortunately so far behind.
My 2c: I think the "cloud vs local" debate is (maybe) a false dichotomy. In my experience, I use a hybrid approach and I've seen a huge productivity boost from it.
The cloud-based models are fine for big and complex tasks, but the pricing is ridiculous for small stuff—like summarizing a discussion or fixing a small bug. And cloud and privacy have never been a good match.
As an example, this comment itself was written with the help of Qwen3.5-4B running locally with an extension on top of llama.cpp default web UI [1]. The extension injects my browser's context directly into the conversation, which allows me to summarize things and draft up comments quickly. Speed is pretty acceptable for the size: ~5s TTFT and ~100 t/s generation, all running on a Macbook M5.
And when I want to run bigger tasks, I don't just stick to one provider. Apart from well-known closed-weight providers like OpenAI or Anthropic, I also experiment with open-weight models like GLM-5.1, DeepSeek V4, and Qwen3.6-27B, which provide quite good results for the price.
I'd argue both have value, and I don't see why anyone needs to choose one exclusively. Anyone else doing this?
[1]: https://github.com/ngxson/llama-companion
Why not just use DS V4 Flash for the small stuff? Very fast and extremely cheap.
The dsv4 flash is 158B params in total. It is possible to run locally but will require all my system RAM.
Also, a lot of my day-to-day tasks perform the same on both small and bigger models: summarize a web page, draft a response, translations, quick web search, etc.
Sorry, I meant non-locally.
I'm assuming privacy is not a concern since you mentioned using Deepseek already. The cost of V4 Flash for small tasks is so minuscule as to be almost free, and you don't have to deal with a churning laptop (or even buying a high-end laptop, for someone who doesn't already have one).
I guess what I'm really asking is, what's the advantage of using these small local models if privacy isn't a concern?
I do use both DSv4 the "normal" and the flash variant, non-locally. It works well, not exceptionally. And while it's cheap, I'd say that the difference between $1 per month vs $5 per month is not a big concern to me. IMO pricing is pretty competitive among open-weight models: https://huggingface.co/inference/models
Depending on use cases, but for me I found 2 use cases where a local model is a must and not optional:
- Running offline without internet access: for example, I have this project that allow transcribe and summarize audio in real time. I already used it in some events where wifi is not available: https://github.com/ngxson/llama.cpp-realtime-audio-recap
- Handle private personal data, for example health records. This is the same category of "privacy" that you mentioned, but I just want to bring up the fact that people value their privacy differently.
I run local models and they work fine for me, but specifically for use in coding harnesses, I'm having a hard time. Tools tend to end up in the same loop, trying to `ls` the same folder or `grep` the same file, over and over and eating up the whole context. Super hard to get it to do anything but that. Any tips?
"Just get a 64GB Mac with 1TB of storage!"
LOL - some of us have a budget
Sure, but it's also not really out of scale with the cost of a shop tool in other trades.
If you're a professional that's confident in a positive return on the investment (optimal or not), or just a hobbyist with the luxury budget for a "shop" that cost is well within norms.
That's not everybody, of course, but it's not some inconceivable fantasy. A lot of people in the tech community here on HN, specifically, end up with pretty high discretionary budgets that they pour into stuff like this.
A Strix Halo with similar RAM is considerably cheaper. Still not cheap, mind, but performance is OK (not great) and it will run more or less the same models.
At least for me, it's been pretty great, but I bought my system when it was $1800, now looks like the same system is $2700 and out of stock. I still haven't quite been able to run 120B parameter models under Windows, but for Qwen Coder 30B, it works pretty darn well for my at home needs.
Yeah, they have gone up a lot since I bought mine too. I did get Qwen3.5-122b running on all-GPU (on a 128GB machine) under a minimal Arch Linux setup (I do my GUI work on a much cheaper box). It worked, but Qwen3.6-35b is performing almost as well and a lot faster.
Still cheaper than a new Mac. Maybe not cheaper than a used one.
I've certainly thought about just moving the box to Linux, but it took far to long personally to get everything running under AMD and it works 'well enough' that I don't want to make the switch. I tried playing with GAIA on it, felt a bit limited, and now have Hermes up and running, and that seems to work quite well. All the tools are changing so quickly, it's sometimes difficult to settle in on 'what's best', so I certainly can understand folks that just want to pay for a AI subscription and be done with it.
He is using a 2022 M2, which you can get that for about $2k used. That is beyond reasonable.
She
Global Affordability Estimate:
Top 10% of global earners (~800M people) can afford a $2,000 device without major financial strain.
Top 25% (~2B people) could afford it with some budget adjustments.
Bottom 50% (~4B people) would find it prohibitively expensive.
So for a SV top income, maybe that might look more like the weekly pet brushing budget, but for most people out there this is not that much of a no-brainer.
The maths changes if you're working for yourself. Because I live in Europe, I've ended up working as a contractor due to the lack of a legal entity in my country. While that mostly sucked for a bunch of reasons, I was able to get a 64Gb Mac M2 a few years back with approximately a 52% discount, which was kinda nice.
If you're working for yourself paying monthly is exactly the same as amortising an asset. Personally I'd rather my business just pay $100 a month than have to deal with additional hardware and software maintenance while using a depreciating asset that is break-even after 3-5 years depending on the spec.
Yes, because the bottom 50%, mostly impoverished or near impoverished folks were spending money on Claude Code subscriptions instead /s
No need. You can run the Gemma 4 and Qwen3.5 MoE models with as little as 12 GB of VRAM at 30-40 tps (Q4/Q5), and they both blow GPT-4o and DeepSeek R1 out of the water.
AI and budgets don't mix well at the moment
Yeah, I never had a computer that cost north of $800 until recently. While that is far from the typical HN user's budget, my bet is that it is much closer to average.
Besides those with effectively unlimited budgets for their personal compute, local models are still a long ways off.
Though, that shouldn't be conflated with the value of open-source models, which can be used by cloud providers to significantly reduce cost of intelligence.
> Yeah, I never had a computer that cost north of $800 until recently. While that is far from the typical HN user's budget, my bet is that it is much closer to average.
There are segments, everything from "Average person in world" to "Average creative professional using computers for work" and more on HN, with a wide range of costs for the hardware. HN probably skews towards the latter rather than the former, probably sitting with enterprise hardware next to them basically for fun, hard to make wider conclusions from what people here have or not.
If we define "typical" as the median HN budget, it's probably about the same as yours. Maybe the answer would have been different 10 or 20 years ago, but the era of truly needing a big budget PC has been over for a while.
It's just for gaming and AI now. Maybe not even gaming as much anymore.
Consider the perspective of someone who has a practically unlimited budget for PCs, doesn't game much anymore, and doesn't need AI to do their job. It's just part of getting older, and there are plenty of people in their late 30s and older on here.
Pros buy their own tools. This is why working for yourself is better than working for a corpo, you get to choose your weapon.
Not related, but, I can't seem to get my copilot-cli (office is an MS shop) use qwen3.5:27b on ollama for some odd reason.
After the recent changes to usage, I've spent an annoyingly long number of hours trying to get this to work.
Only if blessed with enough RAM and disk space,
> 64 GB RAM and 1TB storage
Ah ok, not something regular joe and jane happen to have lying around at home.
Additionally the whole configuration is still very much low level, bunch of CLI commands, and if the model doesn't fit for the task at hand, it starts allucinating, generating gibberish, whatever.
Because I've seen too many people spending a lot of money on expensive hardware, without really using it in the end:
Most of those models are also available via Openrouter and many other platforms. Dirt cheap, and much faster than on consumer GPUs. Perfect to try and compare the different options.
Local models are one of the main drivers for our installer / Desktop app for OpenClaw https://holaclaw.ai (disclaimer I am one of the founders). The smaller models are really only suitable for the most basic tasks, but if you have 32gb-64gb you can get real work done (ie complex web workflows) without third party hosted models
I’m keen to understand speed here etc etc. if I bought a Mac studio with 96GB - what can I realistically run, how’s it compare to fable/opus etc and how fast is it?
Currently maxing out two Claude code accounts every x hours when working on large code migrations or setting up new iOS apps etc - most of time it’s fine but occasionally it’s mega frustrating!
I strongly recommend trying LM Studio - it's the lowest friction way to try out models, you can browse https://lmstudio.ai/models and click "Get" and then "Run in LM Studio" to download and run a model.
With 96GB I'd start with the Gemma 4 and Qwen 3.6 models. Any of those should work fine.
I think currently you can only get the M3 Ultra Studio with 96gb, and for coding tasks, say you rub Qwen Coder on it (which doesn't need that much ram), it's not the fastest, something like 30-40 tok/sec. Probably better with a MacBook Pro with the M5 chip. There is a website for comparing different configurations and models: https://llmcheck.net/benchmarks
And if you want to dial in a setting in between: I've switched to Kimi K2.6 (now K2.7) and DeepSeek through OpenRouter and Reasonix for pretty much everything, with no discernible loss of analytical quality or utility.
However, like many commenters, I don't really believe in vibe-coding, long-horizon agentic one-shot agentic coding, etc. and do not use LLMs for huge generation tasks that involve designing things end-to-end.
I also have an MBP with 128 GB of unified memory and do quite a bit of Qwen3.6-35B-A3B. No, it's not as smart as the aforementioned models, to say nothing of frontier, but many people seem pleasantly shocked by the number of banal tasks that do not require these.
If vibe-coding is hopping into a self-driving car and telling it to take you anywhere you can get a coffee, then I use coding agents more like a bicycle - they let me get further faster than if I'd walked, but I still have to decide where to go and how to get there, and I still have to pedal.
I don't vibe-code, but I do decide what to implement and what patterns to use (perhaps asking the model to analyze and give advice on this first), then I have it handle the nitty-gritty of the implementation itself. For this usage style, the latest local models are as good as having Claude at home.
I won't say it's been _easy_ (I ended up implementing my own harness to accommodate the idiosyncrasies of local models), but I will say that for the effort, having a coding agent that's essentially free to query as much as I want has been life-changing as a dev, especially when it comes to working on side projects. Knowing that my agent will never get worse in quality, suddenly cost more than it does now, or be suddenly made unavailable by external factors, was absolutely worth the trouble. And on top of all that, I can't believe it's as good as it is.
Good depends a lot. If you are in the token maxxing hype you will probably find these models very bad comparing to SOTA, unfortunately.
The good news might be: opensource models are now good (enough) for day2day usage. But is it really? I feel that companies will always naturally strive for the best and use the SOTA (as long it is not too expensive).
I see OSS models being a good backbone for companies in the future that have validated workflows and could use those for privacy or to spare costs.
IDK, might have gone a little bit off-topic here.
I've been running Qwen3.6-35B-A3B (and 3.5 previously) locally and it's a great model for many small tasks, probably a significant chunk of what most normal people are using LLMs for right now.
But for coding in a harness? In my experience it's unusable even for small projects. It just gets hard stuck at every little problem, wasting hundreds of thousands of tokens trying to make a convoluted solution work instead of doing the obvious thing. Or it will spend hours trying to reason through a fairly simple code flow, incrementally adding debug print statements, only to get confused by the output and then editing completely unrelated code that it convinced itself is the problem.
I've tried instead giving Sonnet the problem description and code and have it come up with a detailed plan that Qwen should implement, but doing that actually consumes a significant amount of tokens compared to just telling it to implement everything, and the results are honestly not that much better. There are just too often subtle issues with the plan that Qwen doesn't recognize when implementing, but make the resulting solution it comes up with unusable.
I love that local LLMs are being discussed more often on HN recently. But for the post, I find it strange that the author claimed they were working with local models from day 1, but wrote a post that still links to Qwen2.5 and Qwen3 in mid June 2026.
the qwopus 27b model is good for grunt work style tasks, even across multiple files. Piping a bunch of things through, small factoring changes, stuff that just takes time to type out.
I wouldn't rely on it for large stuff like codex though. I haven't tried out deepseek/kimi, if we could run those locally it would be great.
Looking at some benchmarks, the latest ~30B Gemma/Qwen score similar as Claude or GPT versions that were released just one year earlier. That's crazy progress. I can't imagine how it will be in a few years.
There are good use cases for them for sure, the Gemma 4 Good hackathon a while ago showed how local models can solve problems in health and education in areas with low connectivity or small infrastructure.
I think gemma-4-26b-a4b and Qwen3.6-35B-A3B show that there's something very interesting about a local model that does mixture-of-experts (which helps a lot with performance) and has in the order of 30 billion parameters.
These models are very capable, and use around 20-30GB of RAM while they are running.
Provided you have 64GB of RAM that leaves space for running other applications at the same time.
Obtaining that 64GB RAM is a meaningful obstacle for many.
I'm still amazed that you can run LLMs of this quality on a machine that costs less than $3,000.
I used to assume that anything GPT-4 equivalent or higher would need $30,000+ of server-class hardware.
That said... gemma-4-12b-qat is 7.15GB on disk so should run reasonably well in 16GB, that takes it down to MacBook Air territory https://lmstudio.ai/models/google/gemma-4-12b-qat
I tried some smaller Gemma4 and Qwen3.6 quants on my MBA with M5/16GB and had like 20-60 tokens per second. At 60 it felt pretty okay and that hardware is on the lower end.
I'd assume a Mac with 32-64GB memory would get some reasonable results.
> “if we are constrained by performance and price, what architectural tradeoffs do we need to make?” a question that so far has not really been asked in the mad token gold rush.
To be fair, I think the labs are also interested in this (e.g OpenAI parameter golf). But the incentives are tricky. When the subsidies and tokenmaxxing era ends, local models will be essential.
The problem here is always the cost-benefit. For $200/mo, you're receiving subsidized best of breed access. There's no model competing for that price anywhere. If a 27B param model is what you choose, show me your hardware! I would love to be wrong...
But for how long? The subsidized phase is probably short, and then what? I run Qwen 3.5 27 Dense om my old AMD RX7900XTX at about 45 t/s and barely use my Claude Code subscription anymore.
I have been using qwen and glm based models from last 2 years, ended up buying mutiple machines for the same. Overall i feel 24vram is a must have to get get performance (speed wise) to match hosted soln. I have 2 machines a 12gb vram one and a 24gb one. On 12gb vram i get around 50tps generation and 500tps prompt processing and on 24gb one i get 180tps generation and 3500tps prompt processing. I have different configs for different scenarios and I also use llama cpp manager manage all my configs (https://github.com/anubhavgupta/llama-cpp-manager)
> I have no concrete scientific evidence of this - my own personal vibe metric of “is a model good enough” is, “do I have to double-check it against an API model”, and GPT-OSS was the first one where I started doing that a lot less often.
The good old butt dyno!
I’ve been eyeing local models more and more with Anthropic squeezing more and more on the subscriptions. A few comments on HN had me waiting until they improved more but this article makes me wonder if I should reconsider that.
I’ve been doing some pretty niche development using a game and a script extender for said game. If these models can handle that, I’d feel good about switching.
I am happy to pay OpenAI for a cheaper model a few generations behind. But they deprecate models aggressively. They push you to bigger and smarter models, when 95% of my work doesn’t need it.
I’d love it if model providers just let old models run and let us pay less, but the deprecation makes me want to look into local models.
I currently have a desktop with a 4060 ti (16gb of vram). Most models I have tested that fit within that are not good enough for anything other then type completion (in regards to coding tasks)
I have been considering getting the 58gb Mac Mini but that is a decent amount of money to spend without confirmation on a) how fast is it and b) will it work for well-defined tasks.
The challenge I have is getting a large enough context window so tool calls work reliably, the local models easily slip into hallucinated JSON tool responses and won't trigger the tools as a result.
Same here. I'm curious what others loving Qwen are doing differently, because it constantly hits this issue for me. It's been great for autofilling blocks, but difficult for me to use agentically.
Is there a local harness designed around the local model use case that is claude code like? Opencode has been problematic at times, pi works for one off for me but not back and forth conversations with the LLM. Considering I only use Qwen or Gemma models I'm close to just writing my own at this point
I wonder how much local models hallucinate. I am getting almost daily an "Honest answers: I made that up." reply from Claude Opus when I challenge some silly thing it's trying to do.
If you wanted to do some research or learn about post training and agent harnesses, is that a good option with these local models? What hardware is recommended, or easiest to go with a Mac Studio with 64GB+ RAM?
The problem with QWEN is that it just can't edit files reliably, I had to hack Pi all over to reduce the pain, but still far from perfect...does Gemma 4 strugle on this?
I've just made a milestone on my project, moving away from AWS (budget) to self-hosted and the local models are so much faster than in the past. Beyond LLMs, having embeddings, image, video, audio gen available is crazy.
Running locally is the bar; it's hard to make these things a service which scales.
With Apple silicon and now the RTX Spark there are real discussions whether local AI is the future. The only problem is Western open source models are so far behind. I genuinely feel there's a push to fix this. Gemma is getting more frequent releases and Nvdia is quietly creating very cool small models. I hope both the hardware and models catch up and local really does emerge.
Tangential but reading on mobile, the font size in the code snippets are all over the place. I actually have the same issue on my blog. Anyone knows why?
In my experience, with a system of 32GB RAM and 24GB VRAM, no, they aren't that good.
> I have a 2022 M2 Mac with 64 GB RAM
I closed the article after that.
The author has no idea what a privilege it is to have a machine like that for personal use, and how 99% of the population are not going to afford a setup like that.
Just some back-of-the-envelope maths will tell you that a $20/month Claude subscription makes much more sense financially.
99% of the population don’t code using models, local or remote. So that’s a useless metric.
What % of developers could afford an older MacBook model, second hand? Far, far more than 1%.
really want to try local models, but I don't have the hardware yet. Probably I'm the only one here still using a Mac Mini m1 8gb 2020. :/
I have some decent specs, but I’m stuck with AMD graphics card which I’ve been told is a non-starter
I really recommend Qwen3.6 27B.
Make some tests, and its 8 bit version runs at 30tok/s when using llama.cpp with MTP and run on Macbook Max M5. I have 128 GB, but but 64 GB is well enough. https://github.com/stared/benching-local-llms-on-apple-silic...
When using benchmarks, it gives more-or-less the level of SotA mid-late 2025.
I run the exact same model, on the exact same hardware - amazing results. Pair it with good search skills (Tavily, Brave, Exa) and you have a near-SOTA model on your desk.
Did you mean 2025?
Yes, fixed
The big caveat here is that these local models require you to invest some time tweaking your harness, AGENTS.md, and skills in order to get things roughly to the level you'd expect. But something like Qwen3.6-27B with web search capabilities and a good set of skills really is impressive! Especially considering that you can go wild and not worry about token costs.
The other thing that people tend to gloss over is that you really do need to spend some $$$ on decent hardware. Yeah, you CAN run some 4-bit quant with heavily quantized cache on your 16GB card, but it's not going to be a great experience (I think this is where a lot of the "if you think it's gonna be any good, you're going to be disappointed" stuff comes from). Yes it's a lot of $$$ upfront but it's very much unknown when hardware prices are going to come back to reality. There's a lot of hopes and dreams that any minute now an H100 will be worth pennies because "that's how it's always been" w.r.t. computer hardware, but we are living in interesting times. So you can't just make the tired old assumptions that a Claude subscription over three years time will work out to be dramatically less than the value of some card three years from now. We STILL have basically anything with >=24GB VRAM appreciating in value, which is absolutely wild. What I'm saying is, the depreciation curve may very well be a lot less dramatic and fast than it used to be, going forward.
This is actually a really insightful post !
https://canirun.ai
open source must win
Good? My Macbook m3 with 36gb locked up after it filled all memory with Gemma4. A bit useful yes. But it eats all resources. For local models to be useful we need at least 128gb of system memory and 512gb of video memory. Plus 8 times the compute of a single 5090/h200
I've been trying local models for the boring stuff you might be thinking about: writing small docs.
So i've tested a couple, and the speed is finally impressive. My colleague uses paid tiers of claude and GPT, and the speed is comparable. Maybe even slightly faster on my end.
The problem is: i'm running the model on my work laptop, a 12th gen i5 with 16GB of RAM (which, you know, i asked to upgrade to 64, but that was right at the time of the great RAM shortage of the '20s) so i'm pretty limited in what i can use. And this is running alongside the usual suspects: Web browser hugging 1.5GB, MPLABX hugging 3, windows taking at least 5 just to sit idle, thermal throttled to 1GHz ... And yet its speed is comparable to a paid service. A lunch's worth of tokens vs a few cents of power.
So, what i found, what i fount... What i found is that i need AT LEAST 16k of context window, otherwise they will halt when i pass a small C file for analysis. And coding models will shit the bed with 4k. But we all know that, context size is King.
I found out that Qwen will keep looping while thinking, but that's not a surprise to you, either. But give it enough time and you will get an useful answer. I was hoping to using it as a better warning system for some languages, but i fear i need muuuch more context size, because i tried to feed a file that had a function with an endless loop:
At 4k context it almost shit the bed if i gave it just the offending function, then told it where to look at. At 16k context, with the whole file, it needed some guidance to what the problem was, and after 10-15 minutes of thinking it found the issue. Problem is, it kept second guessing itself for another 20 minutes on the same unrelated thing before giving the output. For which the fix was wrong, but the semanthic was correct. Good enough. Maybe it will be faster if i don't ask for a fix (which i didn't i just asked to look for a specific issue)
Wish i had 3 times the RAM so i can see what happens with more context.
Then i gave it the task to analyze a C file to make an API document. It took half an hour, but then i had a good starting point, which i had to keep changing because it would confuse commands with IDs and things like that.
This was the Qwen 3.5 9B model.
I then tested Gemma 4, being impressed at the tokens per second it gives on my Pixel 8A. Same tasks: same issues with short context, with long context it gave absolutely useless answers when looking at code, but it took 1/3 the time of qwen.
In producing documentation, instead, it was much faster, and it never hallucinated data. Good. in 15 minutes i had everything done.
Not bad for stuff running on a business laptop, while doing actual work.
Tomorrow i will try Qwen 3.6, let's see how it goes..